Hatsan Bully .30 with the DonnyFL Emperor, shooting video added.

Forums PCP Airguns Hatsan Bully .30 with the DonnyFL Emperor, shooting video added.

  • Views : 2771
  • Link

    Imold
    Participant
    Member

    Just thought I would share a pic or two of my Hatsan Bully .30 with the DonnyFL Emperor installed on it.

    Link

    Hynzie
    Participant
    Member

    it looks mean ,hows it working

    Link

    Imold
    Participant
    Member

    I’m just getting ready to go out to my range and test it out, just refilled my 74 cf tank and grabbed a tin of JSBs.

    Link

    Imold
    Participant
    Member

    Two more pics from the range and I must say the Emperor put the muzzle on the .30 Bully cause all I hear now are the internal workings of the Bully and the pellet hitting steel, it was well worth the investment. 

    Big High Five to Donny.

    Link

    Imold
    Participant
    Member

    Tomorrow when I go out I’ll set up my chrono and see what I’m getting, I was at 991-995 FPS before the installation of the Emperor so will find out if it increased or decreased my fps, also I will add that after each shot there is a slight hiss of air and I believe that is from air leaving the small holes drilled on the LDC so f I have any complaints it that the Bully is 10” longer.

    Link

    LTU-013
    Participant
    Member

    I had to return brand new .357 Bully, fill port sliding cover was not opening completely and sharp edge was slicing through fill probe o-rings 

    I don't know who called that rifle Quiet Energy 

    It sounded like cannon, I have closest neighbor house a few hundred yards away, still had to stop

    it was like shooting firearm  

    Please tell how DonnyFL works for you??? Is it backyard friendly after installation?

    Thanks

     

     

    Link

    Imold
    Participant
    Member

    The Hatsans are just loud to start with even the QE and the .30 Bully is no exception and that’s why I was Leary on spending money on a LDC for it  I thought no way can this be tamed but now after putting the DonnyFL Emperor on it I’m glad I did, what I hear more now is the internal workings of the Bully and after each shot there is a small hiss of air leaving the LDC from those small holes Donny drilled in the main body.

    Now is it back yard friendly? Well I shoot out in the country on my other property so I don’t have neighbors to worry about and I don’t get any repor off houses or fences like you would in town but I do know I can sit next to it while my son shoots it now and I don’t need to cover my ears and I can clearly hear the pellet strike the steel plates all the way out to 100 yards and before I put the Emperor on it was hard to hear the Impact because of how loud it was.

    What I can do or will do when I go out tomorrow and shoot I’ll pay more attention to how loud it really is because today I was so happy that it wasn’t barking anymore I really didn’t pay enough attention to how loud it really was but I would say if I sat in my pickup 30-40 feet away it would be hard to hear inside but let me test that out tomorrow with my son, my camper is about 25 feet behind/north of my bench and I park my pickup about 30-40 feet away from the bench on the west side and I’ll sit in both and see how it really is.

    Link

    Imold
    Participant
    Member

    here is what I’m getting now with the Bully 30. And it’s quite now.

    Link

    donnyfl
    Dealer
    Dealer

    Very nice Imold, so the Emperor didn't change your speed at all. Thank you for documenting your findings.

    Link

    Imold
    Participant
    Member

    Video of my Bully .30 with the DonnyFL Emperor at seven feet. Moved the chrono and my defuser broke, it’s old.

     

     

    Link

    Imold
    Participant
    Member

    donnyfl

    Very nice Imold, so the Emperor didn't change your speed at all. Thank you for documenting your findings.

    I think I got a shot video to load which shows how quiet it is now,  I did have to make a very small scope adjustment but it wasn’t much, it could of been me just thinking it needed to be, one or two clicks vertical.

    Link

    Imold
    Participant
    Member

    That’s a big improvement for a Hatsan, loading and pellet hitting plate at 50 yards is louder then the shot.

    Link

    AnimalHitman
    Participant
    Member

    Donny, I can attest that my Sumo did not change my average muzzle fps either. This was determined by running a full-bottle regulated shot string (47 shots) on my Wildcat .25 Mk1. The difference was de minimis (849.2 fps to 848.0 fps). I didn't have to generate a new Chairgun range card. There were only three variances and they were all at the 100th mil-dot level. (I have my WC ranged out to 100 yds.)

    I am moments away from running a shot string with my Emperor. I'll keep you posted! Thank you so much for vastly enhancing my AG experience 🙂

     

    Link

    Imold
    Participant
    Member

    Another pic with the Bully and my youngest sons .25 BT65SB Elite QE.

    Link

    Imold
    Participant
    Member

    Ended up taking off the Hawke Vantage and put the Vortex Crossfire II with high rings, with medium rings the front bell rubbed but worked.

    Link

    Imold
    Participant
    Member

    Ended up putting the Hawke back on to get the scope lower and more inline with the barrel, the Crossfire sits to high.

    Link

    jland48
    Participant
    Member

    Do you find it difficult to keep your scope zeroed considering the way the scope mounting rail is made on the gun?

    Link

    Bigragu
    Participant
    Member

    Imold- can you tell me a little bit about your bipod? Manufacturer? Height off of table? Height adjustable? Lightweight? Does it come with a pic attachment to it, or do you have an adapter to go from pic rail to sling stud in between? Lastly, as you tilt the rifle side to side, any flexing on that bottle cover transferring up to the shroud bands? Maybe your bipod allows side to side tilt. That would for sure not allow that bottle cover to flex.

     

    got a question on your DonnyFL emperor. I have the Donny FL Shogun, and mine does not tame the rapport like yours does. You mentioned some added vent holes that Donny put in? Was that a modification to his own product, or did it come this way, with the vent holes? Can you show a close up pic of these vent holes?

     

    Thank you!! By the way, nice range!! If that’s on your property, then that’s an air gunners dream right there!

    Link

    Bob_O
    Participant
    Member

    Some of Donny's suppressors have a new design….pin sized vent holes around the body and/or in the end cap (slightly larger holes), which make a noticeable difference/reduction in suppression.

    The Tatsu and Tanto have pin holes around the body/can.  The new Sumo 30 has them in both areas.  You can't beat Donny's products for the number of options as well as performance.

    Link

    Imold
    Participant
    Member

    jland48

    Do you find it difficult to keep your scope zeroed considering the way the scope mounting rail is made on the gun?

    So far it’s holding zero just fine but I did find out it’s a bit picky on scope height due to how tall the rail is.

Viewing 20 posts - 1 through 20 (of 84 total)

You must be logged in to reply to this topic.