Hatsan at44 problem

Forums PCP Airguns Hatsan at44 problem

  • Views : 579
  • Link

    Patundra
    Participant
    Member

    I was shooting when my breech seal and retainer blew out. Can anyone tell me how to put back in.

    Thanks

    Link

    blackdiesel
    Participant
    Member

    What do you mean by retainer?  To replace the breech seal remove the barrel.  You can unscrew a cap at the end of the barrel.  It’s hard to notice but the very end will unscrew.  Just replace the seal in the cap and screw it back onto the barrel. If you have the QE model you will have to remove the shroud before removing the barrel.

    Link

    Patundra
    Participant
    Member

    The cap (I mean) blew off. There are 2 screws holding the barrel. I got one loose but the other is way too tight.

    Link

    JJZatgun
    Participant
    Member

    “Patundra”I was shooting when my breech seal and retainer blew out. Can anyone tell me how to put back in.

    Thanks

    
Watch this cleaning video by Rick Eutsler of Airgunweb on the At44. You will find it very informative for your situation.
    http://www.airgunweb.com/at44-quiet-energy-part-2-airgun-review/

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.