Has anyone got a wildcat mk3 in .30?

My .22 sniper was on order for about a month and "you're a better man than I gunga din" I wasn't doing anything patiently.

I tried to pre-order a conversion kit in 30 cal today from Utah airguns and they wouldn't even take a pre-order apparently FX is so far behind on production every barrel they have is going into guns being shipped all over the world which is a great place for them to be in not so much for me. a man with zero patience. 

So Lefty I can't wait to see some numbers out of your gun. By the way did you get a sniper or compact .30?
 
1595981840_19751578025f20c01096b074.40640110.jpg
 so that is a six shot group that was meant to be a 5-shot group. The first one near the center was meant to be a throwaway I just shot a couple of groups with the FX slugs and I always like to send at least one down the barrel to straighten things out I don't know how to explain it. But I forgot and put it just off of the center and then the next five were almost in the same hole at 67 yards. My target is literally a dime that I traced and then filled in with magic marker 6 dots on a sheet of paper and I photocopy them.
 
Shot a few groups and ran some chronograph numbers on the Sniper 30 Wildcat III. The chronograph results are:

#7 865 fps. 

#6 851 fps.

#5 820 fps.

#4 768 fps.

Groups were shot on #6.

50 yds. .317, .692

75 yds. .692, .442, .692

The above chrono numbers were at 10 yds. from the muzzle to get the sun for the chronograph. Later I chronographed #6 at a 1 ft. distance and it averaged 877. Reg.is set at 150 from factory. I am getting about 26 shots from 220 to 150. Guess I cannot type today.
 
Shot my first Nielsen 49.5 grain slugs today. Dual port with 2.5 extension. 220 fill with reg set at 140. 872 fps out of barrel and fair accuracy but i must say what a thump when they hit. Sounds like a shotgun going off at 50 yards. Only had an hour before work to shoot so short lived. Doing leak down tonight to make sure work is good then will do some more shooting over weekend.