GX compressor is not creating air pressure and won't fill airgun tank. Is this commin? Any quick fix available to correct issue?
GX CS2 Compressor not building air pressure.
- Thread starter Chegui1
- Start date
There is a check valve that can get grease on it.
Turn the pump over. Open the 19mm hex bolt on the bottomed side. Pull out the spring and the pin and the ball bearing out. Clean all and replace. There is a video, lemme see if I can find it quick like.
Turn the pump over. Open the 19mm hex bolt on the bottomed side. Pull out the spring and the pin and the ball bearing out. Clean all and replace. There is a video, lemme see if I can find it quick like.
Upvote 0
This video, 18:30 minutes mark. Good video to watch. This is for the oil bath conversion, bit generally will apply to the simple GX CS2.
https://youtu.be/CH33_Apu3ps
https://youtu.be/CH33_Apu3ps
Upvote 0
I have the cx3. It did have the same issue once. Jimnm is right. Cleaning that part fixed it right up
Upvote 0