Grip Tape! 👌

Ah yes, I use skateboard tape all of the time on my revolvers to add to the grip. I simply add a small shaped piece to the rear of the stock and about an inch along the sides for palm, and thumb grip, stops any slipping.

A little goes a long way and helps tremendously.

mike

Matt I know what you mean tried to find it in black for my cricket carbine on the fore stock ( finger inlay ) but went with a black smooth bubble type that I found on amazon also rubber but only 1" wide worked good . I bought the same type as your"s from True Value 6" wide x any length for my fiberglass kayak . I put it on the bottom in the back so that the sand doesn't wear a hole in the bottom when I come ashore. Buy the way love that gun What cal ? Darell P.S. Sorry I'm colored blind but is that the soft gray rubberized grip tape ? You did a nice job !

https://talongungrips.com/other-grips/material/large-sheet-5x7.html 5x7 " sheets

the granulated is a rougher sandy feel I think, I have used the rubber moss it is a little slick when wet, it is on Randy-68 Taipan Vet

Matt That seems to be the same textured stuff that I used on my fore stock I too like the feel & it adds to the looks of the plain looking cricket carbine . My area was 1/2" x 12 1/2" so I went with ( safe way traction 1" x 60' foot roll safety tape 3510-1 from amazon prime ) also black rubberized . If you ever need the smaller stuff P.M. me as I have 58' left LOL You did a nice job rounding those corners also . Darell 

Revo, is the skateboard tape more like adhesive backed sandpaper?

Yes, it's exactly like that. I have a large sheet (12"x24"?) that I bought about ten years ago, revolver stocks don't require much, so it should last me awhile.

If you want some, I can mail you a piece or two depending on the size needed of course.

mike

Yes, I am the guy who sold the Vet to Randy with the tape applied

try putting a 1/2 wide x 2 (or whatever fits well...)strip down the back of the pistol grip

it locks your hand to the grip......