Put a Hawke on my Impact after removing the Aztec Emerald. Couldn't handle the fine reticle lines on the Aztec. I was sighting in the scope and was not getting the consistent groups I had once gotten. I had mentioned that I chronoed it at an average of 906fps. It'a totally all stock. A member suggested that it was probably a little to hot and that I would get better accuracy if the speed was down some. I changed the setting on the power wheel from MAX to 5 and sure enough the groups tightened right up. Haven't chronoed it yet on setting 5 but plan to in the near future. Might be something for others to try in see if it makes a difference.