The Gen 2 valve is supposed to be much more efficient in .177 and .22 but not so much in .25. Has anyone made this change with good results in the various calibers? I was considering it until I read in several places that it really doesn't do much in my cal, .25.
Gen 2 Valve in Gen 1 Marauder?
- Thread starter Dan25
- Start date
Rather insignificant changes not worth it IMO. If you really wanted you could just update to a gen 2 valve spring but you're better off spending time/money in other places. I would look into a SSG/spring stop guide which would have a greater effect if you don't currently have one or a similar hammer debounce device. GL
-Matt
-Matt
Upvote 0
Gen 1 had slightly different valve for .177/.22 and the .25. One a gen 1 in .177 or .22 the .25 valve ( which is the universal valve now) hod slightly better flow/power.
So if you've the .25 now matter which gen you have the gen1 .25 valve.
John
So if you've the .25 now matter which gen you have the gen1 .25 valve.
John
Upvote 0