Gamo bwbc mod?

  • Views : 459
  • Link

    Bullwhisper
    Participant
    Member

    If I bore out the air port on my gamo would that mean more power? Les recoil?
    or just destroy it altogether 

    Link

    Mentolio
    Participant
    Member

    Most likey destroy it, in my opinion.

    Link

    Paulcat
    Participant
    Member

    I would think that the people who design the gun must use some science and measure the cylinder volume and calculate to have the optimal size port to  create maximum air flow..Bigger doesn’t always mean better,certainly not in engine head porting,and that’s what I’m basing my answer on.You could very well like Mentolio suggests,ruin a good gun.

    Link

    Evergreenair
    Participant
    Member

    I agree with mentolio, I thought the same at first then asked the gang here and did some research and the only thing I found was just check the piston seal. It might not change anything it just depends if the stock seal is bad. I would crony it first to see what your getting if you can’t afford one there an app called crono connect Its free and I use it.
    I live just south of JBLM if you have any questions just haller.

    Link

    Bullwhisper
    Participant
    Member

    Alrighty then, I had just seen a lot of people opening the transfer ports up on the 1322s and qb-79s and other crosmen platforms I figured maybe the science is interchangeable glad I asked befor drilling away at my first break barrel. I’ll just stick with the plan to get a grt-4g from Charlie da tuna (36 bones)
    and a lower power spring http://vortekproducts.com/ourstore/PG2-GAMO-WHISPER?search=Game 
    and that’s so it won’t chew up the inexpensive scopes I slap on it
    also have any of you put a bipod on your springers befor?

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.