FX Wildcat Mk I Power Plenum Installation

2manyAirGunz · Feb 18, 2020

~6 mos ago I installed a Huma regulator into my FX Wildcat mk 1 .25 cal. The ES and accuracy of this rifle is phenomenal. Today I received a Huma "power" plenum. Far-be-it from me to leave well enough alone, I would like to tinker with this rifle. Maybe get it up to the power level of my Taipan Vet long .25 cal, pushing the JSB 34 grain pellets at ~900 FPS.

Can anyone recommend an installation video that shows this installation step-by-step? I.e. like the video showing the installation of the regulator.

Thanks

tsmith · Feb 19, 2020

should be no different than installing your huma reg. just replace your huma spacer with the huma power plentum.

http://foto.huma-air.com/foto/Installation%20guide%20FX%20Wildcat%20-%20Streamline.pdf

2manyAirGunz · Feb 19, 2020

should be no different than installing your huma reg. just replace your huma spacer with the huma power plentum.

http://foto.huma-air.com/foto/Installation%20guide%20FX%20Wildcat%20-%20Streamline.pdf

~~~~~~~~~~~~~~

tsmith · Feb 20, 2020

please post your results. i have a wildcat mk1 also in .25. but i would be more interested in keeping my 34 grain to stay at 800 fps and increase shot count.

2manyAirGunz · Feb 20, 2020

please post your results. i have a wildcat mk1 also in .25. but i would be more interested in keeping my 34 grain to stay at 800 fps and increase shot count.

~~~~~~~~~~~

It's currently a work in progress. Today I intend to adjust the hammer spring.

Rodeo · Feb 20, 2020

Following. I am also interested in what this upgrade could do for the shot count in my WC mk1.

Search

Search

FX Wildcat Mk I Power Plenum Installation

2manyAirGunz

Member

tsmith

Member

2manyAirGunz

Member

tsmith

Member

2manyAirGunz

Member

Rodeo

Member