AGN’ers --=--
I have assembled an Excel spreadsheet for FX Wildcat Gen I, .25 caliber rifles. I had gone through the FX Wildcat schematic to find the O-Rings listed, there were a few suggested on this Forum, so I have added them to my list at the last 3 bottom positions. If you know of other O-Rings that are needed, I can easily add them as well.
1.) I tried to correlate the inches to millimeter, both fractional and decimal, in case you cannot find millimeter yet find inch O-Rings.
2.) Also included the O-Ring range ± per industry standards.
3.) The sheet is set up in order following the FX Wildcat schematic along the left side as a part number listed 'A through E'.
4.) Includes "Where" the O-Ring resides on the rifle along with an approximate pressure rating.
5.) The column to the far right is for your use when ordering.
I have had great success sending this sheet to my local supplier to have them fill the order.
You can use it how ever you see fit....or not.
Here is the updated copy with drawing/schematics and FX Parts List per suggestion below. The schematics are on the RED TAB at the bottom, the Parts list is on the YELLOW TAB at the bottom.
View attachment 1543641192_12556005085c0218684268b1.99509865_FX WC GI O-Rings 2018-11-15.xlsx
I hope that it all makes sense to ya.
mike
I have assembled an Excel spreadsheet for FX Wildcat Gen I, .25 caliber rifles. I had gone through the FX Wildcat schematic to find the O-Rings listed, there were a few suggested on this Forum, so I have added them to my list at the last 3 bottom positions. If you know of other O-Rings that are needed, I can easily add them as well.
1.) I tried to correlate the inches to millimeter, both fractional and decimal, in case you cannot find millimeter yet find inch O-Rings.
2.) Also included the O-Ring range ± per industry standards.
3.) The sheet is set up in order following the FX Wildcat schematic along the left side as a part number listed 'A through E'.
4.) Includes "Where" the O-Ring resides on the rifle along with an approximate pressure rating.
5.) The column to the far right is for your use when ordering.
I have had great success sending this sheet to my local supplier to have them fill the order.
You can use it how ever you see fit....or not.
Here is the updated copy with drawing/schematics and FX Parts List per suggestion below. The schematics are on the RED TAB at the bottom, the Parts list is on the YELLOW TAB at the bottom.
I hope that it all makes sense to ya.
mike
