Fx Wildcat Extrrnal plenum
- Thread starter GK1973
- Start date
I feel a bit stupid asking but what is this? I’m definitely curious, just a little confused....
Thanks.
Thanks.
Upvote 0
If you can add an external plenum to the end of the tube, how do you plug the vent hole on the air tube?
Upvote 0
Looks like the regulator stays in the same position in the air reservoir. It'll still cover the vent.
Glenn in Texas
Glenn in Texas
Upvote 0
Oh. I see it now. That would be cool to buy. I think the I'm around 60 ft-lbs on my .25 wildcat. I wonder if how much higher you could go with this setup
Upvote 0
Nothing big we got with external plenum on mk2 in .22cal.We add more hammer weight and valve seat inner diameter from 5,5mm we made 6mm.
We tryed with jsb 1,6g and max speed was 260m/s with huma regulator set at 140bar.Without drilling transfer port to bigger diameter, brass inlet and pellet probe modification this iz max what we got.
We tryed with jsb 1,6g and max speed was 260m/s with huma regulator set at 140bar.Without drilling transfer port to bigger diameter, brass inlet and pellet probe modification this iz max what we got.
Upvote 0