FX Wildcat compact .25 in the house 26" OAL

I machined a new 16" barrel, the stock .25 are 23"

the breech block are the same, just different size probe.

so all you need to convert is:

barrel and shroud or LDC $200+ , probe $35 and magazine $38

with .22 reg and hammer spring setting it was shooting around 785fps 25g.

had to make a reverse brass hammer weight with Spring quide and boost the reg pressure to 145b to get the speed up. I'm sure it will shoot faster with 155b---but I wanted the shot count at 30.

you can screw on any length LDC to made it supper quiet. The shroud installed is a FX shroud extension that you can screw on a 1/2" 20 adapter.

But this BP was made to be a truck AG that short length has the priority.

Wanted the shroud longer then the air tube---so Here's is the finial look at 26 1/4" long

It's a little louder than a full length shroud, I feel it's still quiet enough 4 me.

at 25-30 yards it shoots about the same accuracy. The short takes a little more time to aim due to being lighter.