Anyone with a FX Smooth twist X Pellet liner A in .22 cal know or can obtain the liners OD? Thanks!
-Matt
-Matt
FX STX Pellet Liner A Outer Diameter
- Thread starter ackuric
- Start date
Perfect, thanks Gunny. I am contemplating running a .22 STX on my .23" ported valve and needed that OD, still tossing around the idea but having that dimension greatly helps design it on paper before I execute!
Very odd dimension though, would need to turn it down to .3125" or 8mm, and sleeve the barrel to fit my receiver, which would have a thimble built inside of the sleeve to accommodate a transfer port...but being ported over bore I may want to wait and see how their slug liners perform before I do any serious considering.
-Matt
Very odd dimension though, would need to turn it down to .3125" or 8mm, and sleeve the barrel to fit my receiver, which would have a thimble built inside of the sleeve to accommodate a transfer port...but being ported over bore I may want to wait and see how their slug liners perform before I do any serious considering.
-Matt
Upvote 0
Sweet, that would only need a light sanding to fit into a 8 mm carbon fiber tube for rigidness + fitment into my breech, if I go this route down the road. Thanks again.
Upvote 0