Fx o ring help please

If you go on the fx website, the support link has the drawing and tells you what o rings you need. I know the .22 is a 009. They give dimensions but it equates to the same. 

Get PUR if you can as they last longer 

I am too new to have needed a new breech seal but where does everyone typically get them when needed? From the dealer whom you purchased from or another source?

Thanks

AJ3

As for being too new to need a breech seal, there is no such thing. O-rings and Seals tend to have a mind of their own and can fail without notice. Just a fact of life. It's better to have some on hand just in case.

I get all of my o-rings from McMaster-Carr online. Awesome selection and will ship anyway you request which saves shipping costs. Polyurethane o-rings cost much more than Buna-N rings. For example:

-009 Polyurethane A70 ($7.24 for a 10 pack) http://www.mcmaster.com/#9558k14/=y5o475
-009 Buna-N A70 ($2.08 for a 100 pack) http://www.mcmaster.com/#9452k17/=y5o7k3

Tell me which rifle you have and what caliber and I will tell you the size and type of o-rings you will need.

Scott

Thanks much Scott, really appreciate it.
Evanix Max ML 22
FX Revolution 22
Vulcan 25

Would you recommend the Poly for the cost?

AJ

I don't use polyurethane unless it specified by the manufacturer. Otherwise, stick to Buna-N. 

FX Revolution:
-009 Polyurethane A90 (Factory Spec); However, I would buy the -009 Buna-N A90 and try them out. http://www.mcmaster.com/#5308t118/=y5pw89

Evanix:
Fill Probe http://www.pyramydair.com/s/a/O_Ring_Set_0099_W_Replacement_for_Probes_4ct/451
Breech -009 Buna-N A70 http://www.mcmaster.com/#9452k17/=y5q7aq

Vulcan: I have no idea

"travels4fun"I don't use polyurethane unless it specified by the manufacturer. Otherwise, stick to Buna-N. 

FX Revolution:
-009 Polyurethane A90 (Factory Spec); However, I would buy the -009 Buna-N A90 and try them out. http://www.mcmaster.com/#5308t118/=y5pw89

Evanix:
Fill Probe http://www.pyramydair.com/s/a/O_Ring_Set_0099_W_Replacement_for_Probes_4ct/451
Breech -009 Buna-N A70 http://www.mcmaster.com/#9452k17/=y5q7aq

Vulcan: I have no idea

Click to expand...

Placed my order today, simple as that I now am prepared for failure...thanks again

"PlanB"

"travels4fun"I don't use polyurethane unless it specified by the manufacturer. Otherwise, stick to Buna-N. 

FX Revolution:
-009 Polyurethane A90 (Factory Spec); However, I would buy the -009 Buna-N A90 and try them out. http://www.mcmaster.com/#5308t118/=y5pw89

Evanix:
Fill Probe http://www.pyramydair.com/s/a/O_Ring_Set_0099_W_Replacement_for_Probes_4ct/451
Breech -009 Buna-N A70 http://www.mcmaster.com/#9452k17/=y5q7aq

Vulcan: I have no idea

Click to expand...

Hey Scott
i thought I had it all figured out. I found fx Royale 22 cal breech prongs, they are no. 009.
the 25 cal ain't so easy, I found .25 id but they are too thick , about .068 and they need to be .05. Do you know where to find the 25's?

Click to expand...

The .25 Royale takes a 6.35mm x 1.27mm Buna-N A70 o-ring. Maryland Metrics sells that size in Viton A80 (Part Number #32393). Here is the link http://mdmetric.com/or/fpm80oringsizelisting.htm. They carry the more difficult to find o-rings. The main o-ring index page is http://mdmetric.com/or/gb01.htm.

I suggest calling them and asking if they carry the o-ring in Buna_N instead of Viton.

Hope that helps.


Can you point us to your website? Also, do you sell FX pump seals? Specifically, I am interested in the FX Indy pump seals/rebuild kits.