FX IMPACT MK2 QUESTION IN .22 CALIBER QUESTION

Forums PCP Airguns FX IMPACT MK2 QUESTION IN .22 CALIBER QUESTION

  • Views : 1242
  • Link

    jwrabbit123
    Participant
    Member

    170 bar is alot of pressure ugg  , I think of that tiny probe bolt isnt made for hi pressures , unless you guys like tap thing out to bigger size or double bolt it , I remember mine was a tiny screw holding the bolt from launching back , I was afraid to go to high cause of this back then , I was completing when i had one to makes a steel plate and  beef up buttplate with alike armor just incase it let go 

                                                                                                    LOU

    Link

    heavy-impact
    Participant
    Member

    jwrabbit123

    wow 100 bar it does this omg  so it would be cool if a tp can be adjusted like a allen bolt with a orfice in it then you can tune both ways .

    do you have to drill  the action and match it or just barrel and isnt barrel just brass adapter  so if you have a few one for pellets one for power ????

     

    The larger the port the more efficient, you just need to lower the pressure to reduce speed and increase shot count.

    Link

    edosan
    Participant
    Member
    Link

    edosan
    Participant
    Member

    jwrabbit123

    ok  how much improvement from porting the tp did it do for you in a .22????

    In a stock impact, you can shoot 0.25 cal 25.4 gn pellet @ 930 +- just tuning hst and reg. The only difference between 0.25 and 0.22 besides the cal, is only the TP

    Link

    edosan
    Participant
    Member

    Jorgo

    In on of the videos they talk about reg pressure  to 170 bars for impact

    More plenium

    700mm barrel

    More pressure

    Yes, on mk2

    Lou, remember there is an oring that seal that probe, beside the bolt…and just in case, keep the but pad up ;)

    Link

    Hookster
    Participant
    Member

    Did FX do more than add a bigger tube behind the reg? Taking Sideshot mag and including it wasnt very innovative. Offering (not including) digital gauges wasnt very innovative (they have been around for a while via Edgun) which I added to my Impact X.  So is the Mark II more about 35cal? I love my X model, I'm trying to understand what they did I havent done already to make me want to buy one. 

    Link

    D-RIG
    Spectator
    Spectator

    Hookster

    Did FX do more than add a bigger tube behind the reg? Taking Sideshot mag and including it wasnt very innovative. Offering (not including) digital gauges wasnt very innovative (they have been around for a while via Edgun) which I added to my Impact X.  So is the Mark II more about 35cal? I love my X model, I'm trying to understand what they did I havent done already to make me want to buy one. 

    One of the things they did that no one seams to mention is

    that they added a second screw to attach the barrel making

    it more secure and ridged .

    Link

    edosan
    Participant
    Member

    Hookster

    Did FX do more than add a bigger tube behind the reg? Taking Sideshot mag and including it wasnt very innovative. Offering (not including) digital gauges wasnt very innovative (they have been around for a while via Edgun) which I added to my Impact X.  So is the Mark II more about 35cal? I love my X model, I'm trying to understand what they did I havent done already to make me want to buy one. 

    Just adding a bigger valve tube / plenum is not enough for 0.357 140 fpe. Probably bigger valve seat, heavier hammer, amog others, more power for heavier pellets or slugs. And probably fixed problems, but nothing official.

    Link

    AR
    Participant
    Member

    D-RIG

    One of the things they did that no one seams to mention is

    that they added a second screw to attach the barrel making

    it more secure and ridged .

    Did they do that on the impact? 

Viewing 9 posts - 21 through 29 (of 29 total)

You must be logged in to reply to this topic.