FX LINERS (AGAIN)!

Forums General Discussion FX LINERS (AGAIN)!

  • Views : 1059
  • Link

    Vadimas
    Participant
    Member

    There was such a label on me.

    Link

    Deleted Account

    new friendly answer from FX Service

     

    Yes sir, the factory is getting an engraving machine in order to label each liner, but has not obtained the machine yet. For now, you have to trace the twist rate that is observable from the exterior of the liner. The Pellet Liner A is 1:30", the slug liner should be close to 1:22". You can also tell by measuring the choke of the muzzle end of the liner. The choke on the Pellet Liner is 0.02", where as the Slug liner should be 0.06". 

     

    Link

    Vadimas
    Participant
    Member

    Boets

    naujas draugiškas atsakymas iš „FX Service“

     

    Yes sir, the factory is getting an engraving machine in order to label each liner, but has not obtained the machine yet. For now, you have to trace the twist rate that is observable from the exterior of the liner. The Pellet Liner A is 1:30", the slug liner should be close to 1:22". You can also tell by measuring the choke of the muzzle end of the liner. The choke on the Pellet Liner is 0.02", where as the Slug liner should be 0.06". 

     

    How to measure out of the choke?
     
    😂😂😂😂

    Link

    Vadimas
    Participant
    Member

    on the slug liner is not grooved from the beginning

    Link

    DeutschKSK
    Participant
    Member

    Just label them.. 

    Link

    Spray1Mark
    Participant
    Member

    Vadimas

    From krale stores there are always bad packs
     
     

    I have to disagree, all my KRALE shipments have been extremely well packed!

    Link

    Spray1Mark
    Participant
    Member

    It seems that few know what FX is actually doing? thanks to Matt for his input, he has more knowledge than anyone as far as FX goes.

    Perhaps FX have been pressured into doing this by public demand? the roll out of such an exciting product should have been handled better!

    Personally I can't wait for my the Daystate slug offering now LOL!

    Link

    Vadimas
    Participant
    Member

    Spray1Mark

    Vadimas

    Kralių parduotuvėse visada yra blogų pakuočių
     
     

    Turiu nesutikti, visi mano KRALE vežimai buvo labai gerai 

     

    the second time I get a bad pack
     
     

    Link

    Spray1Mark
    Participant
    Member

    The guys at Airfective did some work and cut the choke off the slug liner, it appears that the velocity went up and accuraccy didn't suffer!

    Link

    Vadimas
    Participant
    Member

    I had such a thought.
    I will produce the results of the slug tutorials that will get.
    need to buy a 600mm barrel and cut it up to 500mm.

    Link

    Vadimas
    Participant
    Member

    Spray1Mark

    The guys at Airfective did some work and cut the choke off the slug liner, it appears that the velocity went up and accuraccy didn't suffer!

    Maybe you can give a link where is the information? "Airfective"

Viewing 11 posts - 21 through 31 (of 31 total)

You must be logged in to reply to this topic.