FX Impact Schematic and list of orings.

Forums PCP Airguns FX Impact Schematic and list of orings.

  • Views : 6190
  • Link

    gixxer3000
    Participant
    Member

    Just got these from mr.FX. There are still a few orings missing from the list like the 2 in the shroud etc, but maybe we can complete it together =)
    Schematic are not complete either.
    Also available as PDF when i find a place to upload.

    Link

    SethAZ
    Participant
    Member

    I’m not able to see the schematic or the list of o-rings….
    I’ll keep an eye on this thread and hope that it’s posted later.
    Thank you gixxer

    Link

    spysir
    Participant
    Member

    Score!  That should help a lot of people.

    John

    Link

    Westridge
    Participant
    Member

    Wounderful! Thanks alot for sharing. How about that pdf? If there is higher rez images in it i would like to get that. / Samuel

    Link

    FXSHOOTER
    Participant
    Member

    I need size of O’Rings inside Telescoping Shroud?? Anyone know the size of the 2 on the inner tube?

    Link

    APerfectMiss
    Participant
    Member

    “FXSHOOTER”I need size of O’Rings inside Telescoping Shroud?? Anyone know the size of the 2 on the inner tube?

    http://www.amazon.com/Black-Rubber-Rings-Gaskets-Washers/dp/B00UJ983D8?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

    @fxshooter, I bought these and installed two of them already. Seemed to work great for me. I ripped mine when I took my shroud off. 

    Link

    Verve
    Participant
    Member

    Anyone knows the .22 and .25 barrel o’ring size, the outer two and the single o-ring inside the brass chamber.

    The inner o-ring on .25 offers no resistance when pellet probe is inserted. Whereas the .22 one does.

    Thanks

    Link

    gixxer3000
    Participant
    Member

    Deleted due to incorrect data.

    Link

    hsnmz
    Participant
    Member

    just for reference, Royale 500 and Wildcat .25 barrel inner o-ring size is 6.35 x 1.27 NBR70
     

    Link

    Verve
    Participant
    Member

    Thanks gixxer and hsnmz

    I have the 5.5×1.5 on hand. Will search for others.

    Link

    Verve
    Participant
    Member

    From FX:

    Inner
    5,5 = 5.5×1.5 NBR 70
    6,35 = 6.4×1.3 NBR 70
    7,62 = 7.5×1.5 NBR 70

    Outer
    10×2 NBR 70

    Link

    FXSHOOTER
    Participant
    Member

    APerfectMiss

    “FXSHOOTER”I need size of O’Rings inside Telescoping Shroud?? Anyone know the size of the 2 on the inner tube?

    http://www.amazon.com/Black-Rubber-Rings-Gaskets-Washers/dp/B00UJ983D8?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

    @fxshooter, I bought these and installed two of them already. Seemed to work great for me. I ripped mine when I took my shroud off. 

    Mine both ripped also, and another person’s when he was just extention it.. Poor Design/Engineering on a $2k gun.

    Inner Shroud O-Rings are ID 23mm x OD 24mm x CS 1mm NBR 70..

    You have to slide a RAZOR SHARP Aluminum tube with THREADING.. YOU HAVE TO LUBE THE S**T out of it.. That is why the inner tube is covered with lube when you extend it.. FX (FREDIC) come on man?? Everywhere you look sharp azz edges by rubber orings. No wonder all the problems and leaks.. Sorry, I will get off my soap box.. Try finding that size O-Ring w/o ordering online, and will they tear again?? I should have ordered more..

    Thank You A PERFECT MISS!! I Ordered some of these also..

    Link

    FXSHOOTER
    Participant
    Member

    Just FYI the DIMS I posted came from FX CS SUPPORT on Facebook. But I also fully understand others will work, so not trying to act like I know more then anyone here.. I have been in the high end Powder Burner game for a long time. PCPs, dripping wet behind the ears.

    I went from my go to Crossman 2200 Magnum to a Bobcat a 12-18 months ago, and now I am hooked right in the corner.. I have always loved my Pellet guns, to have one in .25 that I can kill a Coyote at 50-80 Maybe 100 yards is just HEAVEN!! I love my Silencers and SBRs, but I can’t shoot them in my yard. Something to be said about that.

    Any help I can get, I appreciate fully!! I just don’t like the fact FX went with a hollow tube with no Air Disruptors in it.. It is NOT the same, NOT as quite. There is a reason why certain people asked for and received the original design..

    Link

    FXSHOOTER
    Participant
    Member

    I found many Online O-Ring manufacturers who had the exact size FX calls for. ORINGSANDMORE (Tominco), http://www.theoringstore.com/index.php?main_page=index&cPath=368_12_36

    And many more..

    Link

    Parrots
    Participant
    Member

    I ordered several Impact service kits and received them 2 weeks ago so all sorted for both mine for awhile ;)

    Link

    Paio
    Participant
    Member

    “Parrots”I ordered several Impact service kits and received them 2 weeks ago so all sorted for both mine for awhile ;)

    
Where did you order them?

    Link

    FXSHOOTER
    Participant
    Member

    Paio

    “Parrots”I ordered several Impact service kits and received them 2 weeks ago so all sorted for both mine for awhile ;)

    
Where did you order them?

    AOA has them for $70 each set!! You can buy a crap load of O-Rings for $70, more then a few sets of replacement rings. Look at where Tominco gets all of his, ORINGSANDMORE.COM Just need a complete list on the Drawings.

    Link

    Verve
    Participant
    Member

    For $70, I have 7 complete sets of O-rings. Got 2 sets of NBR90 (more expensive) and 5 of NBR70. I doubt NBR90 set will be used as I’ve been told these don’t seal as well as NBR70.

    Link

    Verve
    Participant
    Member

    APerfectMiss

    “FXSHOOTER”I need size of O’Rings inside Telescoping Shroud?? Anyone know the size of the 2 on the inner tube?

    http://www.amazon.com/Black-Rubber-Rings-Gaskets-Washers/dp/B00UJ983D8?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

    @fxshooter, I bought these and installed two of them already. Seemed to work great for me. I ripped mine when I took my shroud off. 

    Are there two O-rings in the shroud or one? I can only see one, at the end of the barrel. There’s no o-ring in the middle whereas there is a groove for it.

    Link

    FXSHOOTER
    Participant
    Member

    Verve

    APerfectMiss

    “FXSHOOTER”I need size of O’Rings inside Telescoping Shroud?? Anyone know the size of the 2 on the inner tube?

    http://www.amazon.com/Black-Rubber-Rings-Gaskets-Washers/dp/B00UJ983D8?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

    @fxshooter, I bought these and installed two of them already. Seemed to work great for me. I ripped mine when I took my shroud off. 

    Are there two O-rings in the shroud or one? I can only see one, at the end of the barrel. There’s no o-ring in the middle whereas there is a groove for it.

    There are 2 O-Rings on the inner Shroud and also a Delrin ring. They are all located at the very front 3″ of inner shroud then the ring you are probably talking about is on the raw aluminum end piece that screws on the end of the barrel and secures the inner shroud.

Viewing 20 posts - 1 through 20 (of 98 total)

You must be logged in to reply to this topic.