Does anybody know what size is the o-ring at the end or the valvepin ...checked the Schematics sheet and its listed as one piece and o-ring size is not listed ....and the durometer also
FX Impact MKII Power Plenum
- Thread starter heavyw8
- Start date
Its there on the fx site/support/power plenum.
Right under MkII impact
https://fxairguns.com/support/
Right under MkII impact
https://fxairguns.com/support/
Upvote 0
Upvote 0
Yeah took that route b/4 I posted ....but like I said the oring size is not listed its listed as valvepin complete
Upvote 0
Theres an older thread with really good links for orings and its listed there. "Might" be the same size as before.
This thread
https://www.airgunnation.com/topic/impact-o-ring-list-corrected-with-links/
This size
A25 (also Valve Rod/Pin O-ring)
19761
O-ring 2,2×1 NBR 70
2.21MMB70
http://www.oringsandmore.com/metric-buna-o-rings-2-2-x-1mm-price-for-50-pcs/
This thread
https://www.airgunnation.com/topic/impact-o-ring-list-corrected-with-links/
This size
A25 (also Valve Rod/Pin O-ring)
19761
O-ring 2,2×1 NBR 70
2.21MMB70
http://www.oringsandmore.com/metric-buna-o-rings-2-2-x-1mm-price-for-50-pcs/
Upvote 0
