Fx impact Correction can one hole at 50 again!!

Jump to latest Follow Reply
I've been chatting back and forth over PM with Frank on this. I think he's probably out shooting considering the last PM I got from him...
"Behind the Valve adjuster body there’s the metal piece that’s threaded on the valve rod. Well that first threaded piece was so loose it was about to fall off. I lock tite'd it yesterday morning today I got it all put back together it’s shooting perfect now."
@Frank2533, I hope you don't mind me quoting you (and changing "lactate" to "lock tite" lol)
 
Upvote 0
All good tom. @ GQ the first threaded peice on the valve rod was close to falling off. If yours or anyone's ever does this you'll know if you take valve adjuster body off and the valve rod isn't coming out of the gun straight sorda dropped look to it. Mine was on the last thread.


I was lucky I checked it when I did. But you need to be carefull not to unthread the opposite end of the valve rod. In my case it was so loose it never put me at risk of unscrewing the other end. The first threaded peice comes off and I dropped loctite inside the threaded hole.


Screwed it back on and pointed the gun down butt of the gun facing up. I did that so I wouldn't be at risk of the loctite dripping inside the gun. I also lightly applied the loctite to minimize any dripping. It's holding up perfectly now.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu