FX Impact .25 with JSB MkII 33.95gr -- what FPS are you getting?

Ernest I'd send this gun to you but I'm on the other side of the planet!

The other end of the rod is where the valve seat screw on too and that has no set screw that loosen more often.

the whole rod has to be removed to properly lock tight and jam the seat tight on the rod

 

 

LMAO..... GQ the guy that made those videos..... is sniperlabyo......just FYI

Of course,they are from Ernest. I promote,them to help other guys who owns Impact. Do you have a problem with that Gumby ?

No.. No problem just didn't know. If you knew. You were posting his videos under his post....If you didn't know... you got to see the humor in that...IDK just struck me as funny.
I have watched his videos at least 20 times.If you own an impact it is a "MUST SEE"

Cool.

Ok. Thank you I'll investigate that end of the rod. I'll wait until I have the o-rings and replace them while it's apart. Are the oring kits on eBay your kits Ernest? With the "Ernest Rowe barrel lock spacer"
Thank's for the videos GQ. 

With my reg set to about 145, I get about 744fps on the power wheel 5 setting and 746 on max. (33.9gr)

On the 25.39 i get about 880 fps max on the power wheel max setting.

Something really strange though, the valve travel adjuster has no line markings on it like the ones i've seen

I've tuned the 33.95's at about 830 to 840fps. Didn't have any trouble getting there, Just did a rebuild, will be testing over the next few days to verify it's still functioning properly.