Previous

FX Impact with Huggett Moderator

Forums › PCP Airguns › FX Impact with Huggett Moderator

  • Views : 7075
    | Subscribe
  • March 15, 2016 at 10:18 pm Link

    Parrots
    Participant
    Member



    Custom printed ends

    March 15, 2016 at 10:43 pm Link

    Jack.K
    Participant
    Member

    Sweet, how’s it sound? Does it goes on the end of the telescopic shroud by replacing the end cap? How much did it cost you? 

    March 19, 2016 at 8:50 pm Link

    DrippinLead
    Participant
    Member

    Wow very nice! Which barrel is it connected to in the picture (22 cal?). How much length does it add to the barrel?
     

    March 19, 2016 at 9:03 pm Link

    Parrots
    Participant
    Member

    “dsdaystate”Wow very nice! Which barrel is it connected to in the picture (22 cal?). How much length does it add to the barrel?
     

    
4.7″ and it’s a .25 barrel. I know these work with the .30 and .25 but the .22 has a tube connected to the end cap on the original shroud that comes out with it and although it can be fitted the original shroud tube retracts back more then it does with the original end cap on.

    April 14, 2016 at 4:15 pm Link

    Jack.K
    Participant
    Member

    How does the Huggett attach to your Impact? Does the Huggett comes with a new end cap for the Impact shroud to fit the moderator?

    April 14, 2016 at 8:30 pm Link

    Parrots
    Participant
    Member

    Fits with an adapter i had made to screw on to shroud and have 1/2″ UNF attachment on other end.

    I also use a Verminator adapter that screws on to the shroud and this allowed Huggets with the Wildcat thread to fit.

    April 15, 2016 at 12:04 pm Link

    Jack.K
    Participant
    Member

    “Parrots”Fits with an adapter i had made to screw on to shroud and have 1/2″ UNF attachment on other end.

    I also use a Verminator adapter that screws on to the shroud and this allowed Huggets with the Wildcat thread to fit.

    
Parrots, If I understand you correctly, you remove the factory shroud end cap from the Impact and replace it with the end cap from a FX Verminator which then allow the Hugget that is design for the Wildcat thread to fit the Impact. 

    April 15, 2016 at 9:15 pm Link

    Vudongthoai
    Participant
    Member

    It would be great that I can buy from anywhere sell the set like this. Man, I have been waiting from November, but ask AoA about the hugget…still not available…you hugget look awesome!!!

    April 17, 2016 at 7:25 am Link

    TexasSteve
    Participant
    Member

    IMHO it makes the gun too long. I had the same with my Talon SS with moderator, started looking like a broomstick and very unwieldy swinging out a door for a quick backyard shot.
     

    April 17, 2016 at 12:30 pm Link

    Parrots
    Participant
    Member

    With the Huggett Belita it is shorter then then with the shroud extended and much more quiet.

    You can also take the shroud off on the .22 and .30 and screw the Huggett directly on the barrel which keeps the rifle about the same length as with the shroud retracted and still quieter.

    April 17, 2016 at 1:15 pm Link

    Jack.K
    Participant
    Member

    Parrots,
    Where did you get the Verminator adapter?

    April 17, 2016 at 2:00 pm Link

    Parrots
    Participant
    Member

    I got it from a local dealer who ordered them in for me.

    I will take a pic of it later so you can see exactly what it is.

    April 19, 2016 at 11:07 am Link

    Jack.K
    Participant
    Member

    “Parrots”Fits with an adapter i had made to screw on to shroud and have 1/2″ UNF attachment on other end.

    I also use a Verminator adapter that screws on to the shroud and this allowed Huggets with the Wildcat thread to fit.

    
If you can, give us more information on the 1/2″ UNF attachment too. Thanks 

    April 23, 2016 at 11:39 pm Link

    Parrots
    Participant
    Member

    Been busy with work and travel lately. Here are the pictures promised. 

    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
    [IMG][/IMG]
     

    April 29, 2016 at 5:19 am Link

    Parrots
    Participant
    Member

    I received a bunch of these Verminator adapters for friends today. The part number on the bag is 18010 for those that messaged me for it :)

    September 27, 2016 at 2:04 pm Link

    lil4re
    Participant
    Member

    where is this for sale?

    September 27, 2016 at 9:42 pm Link

    cheezstake
    Participant
    Member

    thats a great looking setup 

    September 28, 2016 at 4:37 pm Link

    Gunnertrones
    Participant
    Member

    Hugget Belita. .25 and .30. Mounting directly on the extended shroud. Just loosening the endcap. The .22 has a fairly low sound level, so I have not checked if you could get one for that caliber. Very satisfied with the .25′ sound level now. Haven’t uset the .30 yet, but assume the hugget will do its job there also. Got them from airgun heaven – Netherland.


     

    November 6, 2016 at 10:11 pm Link

    Travis224
    Participant
    Member

    “Parrots”Been busy with work and travel lately. Here are the pictures promised. 





     

    
Where do I purchase the endcap with external male threads?

    November 29, 2016 at 10:03 pm Link

    Fuji04
    Participant
    Member

    Where did you get the thread adapter so u can screw this directly to the shroud….not the verminator adapter…..is this a wildcat thread?

  • Author
Viewing 20 posts - 1 through 20 (of 47 total)
1 2 3

You must be logged in to reply to this topic.