FX Dreamline Power Plenum - Installation on Streamline !!

Awesome!  

Yes but you have to install a regulator also or what's the point!!

You could just install the HUMA reg that has the larger plenum included in the assembly (larger than the DL power plenum in fact).

Wouldn't the Streamline regulator work? Mine is set at 150 bar from the factory. I would assume there is a way to lower the factory regulator pressure if a plenum is added to the air tube.

i have looked closely at the power plenum and the streamline . the problem seems to be the male threaded part on the streamline is thicker ( i can mic. it later) than the receiving female portion. i suppose a machinist could turn down the difference but if he get its wrong your buying a new body.

Why not gather up the specifications, and have a quality machine shop make you a power plenum to fit seamlessly with your Streamline? It would seem that if you take the DL power plenum with you, along with the action, and thread pitch/ size etc. it would be a pretty straight forward piece of turning. OR if the Threads of the DL power plenum are the same, couldn't the excess threads be parted off to fit the SL action block? You would lose a bit of internal volume. Another option is to have an aluminum spacer made to take up the excess space, that may be the easiest rout.

I think if it were my project, I would see about having a custom power plenum made. It may or may not be worth it depending on the hourly rate of the local machine shops in yer area.

Just a thought,

-Brandon

From FX USA:







Service USA <[email protected]>

To:Kurt 



Wed, Jun 10 at 5:48 AM




Good morning Kurt - 



It is not compatible due to the threading. There is an aftermarket Power Plenum for the Streamline that can be purchased (not sold by FX AirGuns) by Ernest Rowe or 910 AGTR.





Best Regards,



Melissa

Customer Service Team

3024 Hall Watters Dr 

Ste. #106

Wilmington NC 28405

Main: 866 639 0772 Opt. 1

---

Show original message

Disclaimer: The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.

Just received an FX Power Plenum from Pyramyd. It was a hedge based on backorders of Ernest Rowe's plenum from 910Airguns. (Newman @ 910 has been absolutely fantastic. He's earned my business going forward.)

Well the Rowe plenum showed up . . . and after trying almost a dozen o-rings . . . it leaks.

The FX plenum has now arrived. It went on, fits PERFECTLY, and does not leak.

Just received an FX Power Plenum from Pyramyd. It was a hedge based on backorders of Ernest Rowe's plenum from 910Airguns. (Newman @ 910 has been absolutely fantastic. He's earned my business going forward.)

Well the Rowe plenum showed up . . . and after trying almost a dozen o-rings . . . it leaks.

The FX plenum has now arrived. It went on, fits PERFECTLY, and does not leak.

Click to expand...

Hi genghis9021 -

"The FX plenum has now arrived. It went on, fits PERFECTLY, and does not leak." : which plenum are you referring to please?

Tx

S.

Click to expand...

Thread title: FX Dreamline Power Plenum – Installation on Streamline !!

Does Ernest Rowe make (sell) a plenum for anything else other than the Streamline/Wildcat/Dreamline ?

What other plenum could it be ?

Just received an FX Power Plenum from Pyramyd. It was a hedge based on backorders of Ernest Rowe's plenum from 910Airguns. (Newman @ 910 has been absolutely fantastic. He's earned my business going forward.)

Well the Rowe plenum showed up . . . and after trying almost a dozen o-rings . . . it leaks.

The FX plenum has now arrived. It went on, fits PERFECTLY, and does not leak.

Click to expand...

Hi genghis9021 -

"The FX plenum has now arrived. It went on, fits PERFECTLY, and does not leak." : which plenum are you referring to please?

Tx

S.

Click to expand...

Thread title: FX Dreamline Power Plenum – Installation on Streamline !!

Does Ernest Rowe make (sell) a plenum for anything else other than the Streamline/Wildcat/Dreamline ?

What other plenum could it be ?

Click to expand...

https://910airguntuningandrepairsllc.com/collections/ernest-rowe-custom-shop

It was a rhetorical question . . . but to be succinct and direct - NO.