FX Crown o-ring list

Forums PCP Airguns FX Crown o-ring list

  • Views : 268
  • Link

    Panic-Button
    Participant
    Member

    Hello,

    I recently bought a new FX Crown .22 cal, with a synthetic stock. I wanted spare o-rings to have on hand in case I needed them.

    In the past, I bought spares for my Marauder from The O-ring Store and I got a lot of them for cheap, so I thought I would do the same thing for this Crown.

    Using the exploded view/parts guide I downloaded from FX, I put together an Excel spreadsheet with diagram locations, sizes, FX part numbers, The O-ring Store part numbers and hyperlinks to the o-ring pages.

    The exploded view/part guide can be downloaded here:  http://www.fxairguns.com/support/

    I just placed an order using this information and bought 106 pieces for $14, that included tax and shipping.

    FYI: In the diagram for C1, .177 and .25 cal aren't exact matches with what The O-ring Store has.

    If you find any errors, please let me know.

    Cheers, PB

     

    Link

    steve-l
    Participant
    Member

    I did the same thing and have ordered from a local industrial supply house. They did not have them all in stock, but has ordered them. I expect to have them this week. I ordered 10 each.

    Link

    Panic-Button
    Participant
    Member

    The o-rngs I ordered showed up today, so I used an extra small parts organizer box I had to put them in.

    Using MS Word I created an index sheet so they are easy to find and taped it to the inside lid.

    I also printed out the exploded parts view to put into the box too.

    Cheers, PB

    Link

    Bob_O
    Participant
    Member

    Dang nice!!!

    😮

    Link

    steve-l
    Participant
    Member

    Panic-Button

    Hello,

    I recently bought a new FX Crown .22 cal, with a synthetic stock. I wanted spare o-rings to have on hand in case I needed them.

    In the past, I bought spares for my Marauder from The O-ring Store and I got a lot of them for cheap, so I thought I would do the same thing for this Crown.

    Using the exploded view/parts guide I downloaded from FX, I put together an Excel spreadsheet with diagram locations, sizes, FX part numbers, The O-ring Store part numbers and hyperlinks to the o-ring pages.

    The exploded view/part guide can be downloaded here:  http://www.fxairguns.com/support/

    I just placed an order using this information and bought 106 pieces for $14, that included tax and shipping.

    FYI: In the diagram for C1, .177 and .25 cal aren't exact matches with what The O-ring Store has.

    If you find any errors, please let me know.

    Cheers, PB

     

    These C1 O Rings are indeed a problem for .177 and .25, I'm still looking in Germany and in Holland with no source found yet. I may have to order directly from FX, but my dealer and his distributor in Belgium has been unresponsive. I ordered those by part number in September and still no response.

    Link

    Revoman
    Participant
    Member

    I'll give my local guy a ring and see what they say about those rings.  I'm gonna need some for the .25 Streamline anyway.

    Packing and Seals Inc
    2602 Transportation Ste K
    National City
    619.474.8281
    packingandseals.com

     
     
     
     
     
    Link

    tkerrigan
    Participant
    Member

    These guys have complete kits.     https://www.huma-air.com/FX-Crown#filter:857fa0c128d486982247c53ef9b60524    Regards, Tom

    Link

    STO
    Participant
    Member

    You sir deserve a cookie for compiling this. Sadly all I have to give you is a +1. 

    Link

    Panic-Button
    Participant
    Member

    tkerrigan

    These guys have complete kits.     https://www.huma-air.com/FX-Crown#filter:857fa0c128d486982247c53ef9b60524    Regards, Tom

    Yes, I've seen that, but you only get 12 o-rings for just under $12 their money plus shipping to the US if that's where you live.

    I just received 106 o-rings for under $15 US, that included S&H.

    Cheers, PB

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.