Fx Crown Magazine Carrier

Forums Other Parts, Accessories, & Equipment Fx Crown Magazine Carrier

  • Views : 694
  • Link

    Drizute
    Participant
    Member

    Personally I don't like going out for the day with a pocket/pouch full of pellets, I also don't think the constant jostling of the pellets does a lot for their accuracy.

    So I designed a carrier for the mags, it will hold 5, or you  can use dummies if you need less. Clips to your belt or pants, and allows you close to 100 pellets in readily accessible location, each one protected by the magazine.

    I can print these in PLA, with dummies if required, just trying to gauge the interest, if any.

    MOD EDIT: moved to Other Parts & Accessories  section

    Link

    2D1C
    Participant
    Member

    I'm in!

    Link

    Spray1Mark
    Participant
    Member

    Very nice, sadly getting hold of spare Crown magazines in England is like finding a virgin in Harlem!

    Link

    socaloldman
    Participant
    Member

    Spray1Mark…. I really need to borrow that line.   Could be modified to fit the need.   New one liners get me so excited I could just piss a ring around myself!  Sorry Drizute didn't mean to interrupt the flow .   Those will sell well on Ebay .

    Link

    Drizute
    Participant
    Member

    2D1C PM me I will send you one in exchange for feedback, 

    Sadly in the USA not only are they rare but cost an arm and a leg too, hop over on the ferry… I actually get mine cheaper from here…

    https://www.krale-schietsport.nl/en/

    Link

    stoti
    Participant
    Member

    How much are you going to charge? Thank you. Stoi

    Link

    Spray1Mark
    Participant
    Member

    socaloldman

    Spray1Mark…. I really need to borrow that line.   Could be modified to fit the need.   New one liners get me so excited I could just piss a ring around myself!  Sorry Drizute didn't mean to interrupt the flow .   Those will sell well on Ebay .

     

    No problem, I work for a US based company, fairly common saying there I think!

     

    Link

    SPD
    Participant
    Member

    Looks like a good idea.  Are crown, impact and Royale mags identical?  If so, would work for several airguns.

    Link

    2D1C
    Participant
    Member

     Thank you Drizute!

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.