FX Crown CF Bottle O-Ring Leak

This port is bubbling like a mofo..

I found the problem..





The 4x1.5mm inner o-ring inside of the reg body was shot. The one on the piston itself was fine, but I have a bunch of new ones so I might as well replace them all while they're out.

Man oh man .. I took care of the reg / reg piston o-rings and bubbling, but then the reg body started bubbling I had ONE o-ring for that on hand (I have like 50 coming on the 15th lol). Problem appears to be solved. 

One last thing, I cleaned up the reg threads, but afterwards the felt all dry and gritty. I decided to wipe them down with a microfiber cloth that I sprayed a tiny bit of Slick50 on. Now it screws on and off smooth as butter!

Nice, congrats! 

Good pictures too, keep the good work! You will get better on diagnostics in the future! jaja

Click to expand...

LOL thanks. Air held overnight, I played around with the reg settings and it looks

It's not too bad servicing these regs. The only big PITA are those tiny 2x1's on the screw, but I have over a dozen scribes, picks, and micro tweezers that I keep surgically sharp

On the impact there is one deep in the reg block that is a real PITA, not small but a pain, probably the one Iike less! jaja

Click to expand...

Yeah I know the one. You've got petite fingers though bro, piece of cake  

My Crown raises up 5 bar with the daytime heat, above the pressure set last night, so probably good to go