FX Bobcak Mk2 power adjuster...

I did a search on FX Bobcat Mk2 and came across my own thread. How about that, ha ha.

Anyhow. to answer my own question:

The .22 Bobcat's max power port is smaller than the one on the .25, because it needs less air. However, the FX Indy is pretty much the same as the Bobcat, so I had Ernest install the 3-way power wheel and it worked!

Thanks,

Kmd

Ugh? Glad you’re happy with your Bobcak! Just kidding! What energies and velocities are you getting at the new 3, 2, & 1 power settings?

Click to expand...

LOL... Never noticed that! Too bad I can't edit it anymore!? Thanks for pointing that out though! Anyhow. I used to get 930 and 650 with AirArms 25.4 gr pellets. However, I just got the gun back from a "service" and even though I told them that I wanted it to be like it used to, I now get 860/high and 600/mid and 350/low... I know that the max and mid power numbers are correct, but I am not 100% sure about the lowest power setting. Wrote it down somewhere but cannot find it. No big deal. I have a chrono and can measure tomorrow again.

I will keep you posted.

That said, I am having another issue though. Started a new thread here.

Thanks,

Kmd

I did a search on FX Bobcat Mk2 and came across my own thread. How about that, ha ha.

Anyhow. to answer my own question:

The .22 Bobcat's max power port is smaller than the one on the .25, because it needs less air. However, the FX Indy is pretty much the same as the Bobcat, so I had Ernest install the 3-way power wheel and it worked!

Thanks,

Kmd

Click to expand...

Good info thanks for posting, might work with Royale as well then. Mine has 2 position and id like 3.

Click to expand...

I guess the Bobcat has the same "guts" as the Boss and Royale, right? If so, it should work. Why not. However, take a look at this thread of mine and then decide if it makes sense to do the mod...

Thanks,

Kmd

What I am going to do tomorrow is measure the speed again on all 3 power levels and also do a shot count with each power setting...

I will keep you guys posted...

Thanks,

Kmd