From Paintball/airsoft to airgun?
- Thread starter FukoChan
- Start date
Just buy a Jubilee paintball valve from air hog. I think they are around $135. Joe B sells a slo flo valve that will fit it too. Just make sure the threads are 5/8".
Upvote 0
There is also a valve that's regulated for 2900 psi output. It will work on guns that have a 200 bar fill requirement. The Jubilee will allow you to fill guns with a higher fill.
Upvote 0
Alternately it might be possible to "rebuild or have rebuilt" the existing regulator to output 3K psi. That way you can use it to tether at the bench.
The jubilee and joe b valves mentioned above will just give you another 4500 psi tank.
Thurmond
The jubilee and joe b valves mentioned above will just give you another 4500 psi tank.
Thurmond
Upvote 0
Thank You Black Diesel and T3PRanch. I don;'t mind having a nice portable little tank 
.
I think i'll go that route. Nice to know that these paintball/airsoft tanks can also be used as airgun tank.
. I think i'll go that route. Nice to know that these paintball/airsoft tanks can also be used as airgun tank
.Upvote 0