Found Source for O-Ring for .22 Mag – Daystate Wolf and Regal

Views : 708

| Subscribe
February 16, 2017 at 7:10 pm Link

bowwild
Participant

Member

I needed an o-ring for my Daystate Air Wolf MCT a few weeks ago. I searched various forums and found the size and source at. I you order they ship a minimum of 100 for a bit over $10 plus $7 shipping. Very rapid handling.

McMaster-Carr9262K646Multipurpose O-Ring Oil-Resistant Buna-N, 1.5mm Wide, 25mm ID, Packs of 100

I’m posting this because a couple fine fellows saw a post where I mentioned this and contacted me. I thought maybe others could use the info.

I needed an o-ring for my Daystate Air Wolf MCT a few weeks ago. I searched various forums and found the size and source at. I you order they ship a minimum of 100 for a bit over $10 plus $7 shipping. Very rapid handling. McMaster-Carr9262K646Multipurpose O-Ring Oil-Resistant Buna-N, 1.5mm Wide, 25mm ID, Packs of 100 I'm posting this because a couple fine fellows saw a post where I mentioned this and contacted me. I thought maybe others could use the info.

February 16, 2017 at 7:19 pm Link

Regal_US
Participant

Member

Many thanks for posting this: the O-rings do get chewed up by pellets, so I’ll be ordering a pack.

Question: do you know the part # for the 22 cal pellet probe O-ring? I never know if these are determined by ID, OD etc.

February 16, 2017 at 7:22 pm Link

bowwild
Participant

Member

You know I don’t know. I had to search like crazy to get this mag ring. I’m sure there are a bunch of fellows here who know. You need to get the size and then on that McMaster site they have a zillion combinations.

If you find out be sure to share it here!

Thanks

February 16, 2017 at 7:24 pm Link

DellaDog
Participant

Member

You’re a credit to our passion, Bo.
Thanks
DD

February 16, 2017 at 7:59 pm Link

Eddy1840
Participant

Member

I bought mine here http://m.ebay.com/itm/Daystate-Pellet-Probe-Bolt-Breech-O-Ring-Seals-Air-Wolf-Ranger-MK3-MK4-/152204318611?var=&hash=item2370159793%3Am%3AmcoINn5xYU0jXg0UIPFidnw&_trkparms=pageci%253A54abe208-f4b4-11e6-b416-74dbd180e143%257Cparentrq%253A49c9249e15a0a5e29954a341fff3db70%257Ciid%253A1

February 16, 2017 at 8:13 pm Link

Keith2324
Participant

Member

Here’s a good link with lots of info!

Keith.

https://www.airgunnation.com/topic/daystate-o-rings-a-reference-for-owners/

February 17, 2017 at 4:59 am Link
travels4fun
Participant

Member
“Regal_US”Many thanks for posting this: the O-rings do get chewed up by pellets, so I’ll be ordering a pack.

Question: do you know the part # for the 22 cal pellet probe O-ring? I never know if these are determined by ID, OD etc.

 You can get the o-rings from McMaster-Carr. The standard for the non-metric o-rings is AS568. The .22 cal DayState Regal probe o-ring uses a -004 ring. Click on the part number to take you to the page to order.

Bolt O-rings (aka Pellet Probe): Air Ranger, Air Wolf, MK4, Huntsman, Regal – FAC
- .177: -003 Buna-N A90 Part #5308T112 $2.24 (100 count)
- .20: -004 Buna-N A90 Part #5308T113 $2.27 (100 count)
- .22: -004 Buna-N A90 Part #5308T113 $2.27 (100 count)
- .25: -005 Buna-N A90 Part #5308T114 $2.24 (100 count)
AS568 -004 dimensions:
"Regal_US"Many thanks for posting this: the O-rings do get chewed up by pellets, so I'll be ordering a pack. Question: do you know the part # for the 22 cal pellet probe O-ring? I never know if these are determined by ID, OD etc.
 You can get the o-rings from McMaster-Carr. The standard for the non-metric o-rings is AS568. The .22 cal DayState Regal probe o-ring uses a -004 ring. Click on the part number to take you to the page to order. Bolt O-rings (aka Pellet Probe): Air Ranger, Air Wolf, MK4, Huntsman, Regal – FAC
- .177: -003 Buna-N A90 Part #5308T112 $2.24 (100 count)
- .20: -004 Buna-N A90 Part #5308T113 $2.27 (100 count)
- .22: -004 Buna-N A90 Part #5308T113 $2.27 (100 count)
- .25: -005 Buna-N A90 Part #5308T114 $2.24 (100 count)
AS568 -004 dimensions:
Author

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.