Become an AGN forum member to be included in our multi-thousand dollar Monthly Airgun Giveaways! Winning is as easy as picking a number, no strings attached! This is our way of thanking you for being a part of the worlds biggest airgun forum. Yours truly, Michael Wendt - Owner.
Join HERE

Fittings brass or steel

Views : 171 Likes : 0

Likes : 0

| Subscribe
January 13, 2021 at 10:30 am Link

Chopper61
Participant

Member

So I have this PMV in hooking up to my system. So now I’m finding out the brass fittings I ordered in 1/4 to 1/8 not may not handle the high pressures behind the valve. Can someone chime in on the appropriate fittings to use? Thanks

January 13, 2021 at 12:27 pm Link

SniperM
Participant

Member

Check out https://www.titanfittings.com they have 316 stainless fittings pipe thread rated up to 8,000 psi.

January 13, 2021 at 12:39 pm Link

Chopper61
Participant

Member

Ok so you shouldn’t use brass or copper, u have to go with steel, correct?

January 13, 2021 at 1:24 pm Link

biohazardman
Participant

Member

Nothing wrong with brass, steel or stainless fittings for high pressures. You just need to be sure they are made for it. Find the manufacturers specs if you have doubts.

January 13, 2021 at 1:30 pm Link

Chopper61
Participant

Member

Yes I did. There only rated at 1000 psi so went with stainless steel. Hey thanks for the info awesome forum site on here!
Author

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.