ok in all honesty this was my first shot ever with the armada and a .25 cal for that matter.
click the picture to see the full image
click the picture to see the full image
First time Shooting The Benjamin Armada .25 cal (video)
- Thread starter X27
- Start date
From looking at your video the front scope mount is attached to the Armada housing. And if the housing is skewed your scope will be off as well. Is there a way to not mount the scope mounts onto the housing to keep the scope in line with the barrel?
Upvote 0
The reason I got the gun was to have the ability to put the scope forward and have enough room to put my scope cam and then my eye.
The scope goes on then I need 2.5" between the end of the scope and my camera then I need ? Inches between the camera and my eye. And pushing every thing forward allows me to shoulder the gun normally.
But I know what you are saying and yes I can do that and yes it would work fine and yes the gun groups excellent so far.
but I don't think I should settle I think crosman should at least try to fix the problem.
The scope goes on then I need 2.5" between the end of the scope and my camera then I need ? Inches between the camera and my eye. And pushing every thing forward allows me to shoulder the gun normally.
But I know what you are saying and yes I can do that and yes it would work fine and yes the gun groups excellent so far.
but I don't think I should settle I think crosman should at least try to fix the problem.
Upvote 0
And both mounts are attached to the forehand housing, my cam goes on the forward receiver block rail. Nothing on the back rail. This gives me enough room to shoulder the gun and see the camera.
Upvote 0