First? Royale/Edmu
- Thread starter Glem.Chally
- Start date
Mine measures 30mm at the widest points or 1.1 inch 28 mm across the flats. Hope that helps. Same as WIKI gauges and same as stock gauge from my Veteran.It should fit most European guns as long as thread is BSP.
Upvote 0
Strange, I have my calipers set at 28.05 and can spin the gauge inside it. The "ruler" on the calipers also reads 28mm locked there, maybe there's a slightly bigger size too?
Upvote 0
Your correct its 28mm. I must have forgot to re-zero my calipers, it wouldnt be the first time Lol. You can really see how temp affects pressure, it was only 20F in the garage just now and the pressure dropped 50PSI in 1 hour after setting in the cold. Nothing new but its neat to see pressure readings down to the single digit.
Upvote 0
Thanks Ed and you guys hit it out of the park with this. Ill be ordering 6 more."EDgun"Here is the size of EDMU
Upvote 0
G
Guest
Guest
Great job Glem... Rifle looks great and shooting great. And boy did Ed ever hit a homerun!
Upvote 0
Thanks very much Chuck and I agree, a great innovation in the sport. Did a bit of testing at my indoor plinking power, this is with the reg at 160 and HST at about a turn in gives 500FPS with 25.4's (14ftlbs) and very quiet even without a moderator.
With the EDMU just be aware that if the shot doesn't use up 1.5 BAR minimum it won't register the shot for stat function. The gauge is ultra accurate it just won't realize it's being shot if you use less than 1.5 BAR. All in all VERY happy with the upgrade over the FX plastic cover one. Another cool thing not mentioned is that you can see the display at almost 90 degree viewing angle unlike a mechanical gauge.
10 shots I used 65 PSI total 6.5 PSI per shot
then shot another just to be confident.
10 shots using 55 PSI total 5.5 PSI per shot
Averaged out 6 PSI out of a 480cc and shooting 230 down to 150 bar I could shoot almost 200 shots on the reg and more off it. Crazy.
Upvote 0
G
Guest
Guest
Glem you should know better than to get me started down that road on the numbers! Now I will not be able to resist the temptation to buy an Edgauge...and if I get one for my Wildcat then of course my Streamline is going to want one! Or else she will get jealous and throw a fit! And then there is the two air tubes for my Hatsan ATP1 .25 cal pistol...Whew! Tempt me not Satan! :-o
Upvote 0
Muhahahaha, you won't regret it. Tell me about the sickness I modified two different stocks to fit these beauties.
Upvote 0