Tuning Favorite Edgun Leshiy tunes for .25 cal 🎵🎶

Jump to latest Follow Reply
Pizzaman2976

Pizzaman2976

Member
Feb 27, 2020
547
44
Pizza, United States
Hi guys, 

I'm piggy-backing off a recent similar thread.... I just purchased a classic Leshiy off the classified in .25 and I've never had a .25 cal before. Almost all my airguns are 177 with a couple in .22. 

Do you guys have a favorite tune for the .25? I have the standard reg and also ordered a low power Huma 12-ft reg for lower power.... I think I'd prefer lower power to keep the noise as quiet as possible. Is something like 500 FPS with 25 grain JSB's too low? 10-30 yards mostly. Rats and squirrels hopefully. 

Thanks!
 
Here is one old thread that gets into the low power tunes with larger projectiles.

https://www.airgunnation.com/topic/edgun-leshiy-2-power-velocity-in-30-250mm/

Yes the thread starts off discussing the Leshy 2 but shifts to low power tunes for the Classic.

Look forward to hearing your results.

I'll post back if I find any other old threads. I also want to try some low power tunes with 25 grain projectiles so I'm looking for them anyways.


 
  • Like
Reactions: Pizzaman2976
Upvote 0
Here is one old thread that gets into the low power tunes with larger projectiles.

https://www.airgunnation.com/topic/edgun-leshiy-2-power-velocity-in-30-250mm/

Yes the thread starts off discussing the Leshy 2 but shifts to low power tunes for the Classic.

Look forward to hearing your results.

I'll post back if I find any other old threads. I also want to try some low power tunes with 25 grain projectiles so I'm looking for them anyways.

Click to expand...

Thanks, Scouty!
 
Upvote 0
One other thing. It seems that most outside of the UK recommend not using the black plenum spacer for the sub-12 Huma kit. Evidently that only acts to eliminate the off reg spikes that can exceed 12 FPE in an otherwise properly tuned gun. 

I would shoot your Leshiy as is for a while & only start with HST adjustments. Get an idea of what speed range you like shooting it before diving into reg adjustments and/or swapping the reg entirely. 
 
Upvote 0
Thanks. 

Does anyone know if you need a new valve stem for the 12/ft Huma kit? It comes with a new thinner hammer spring, but it doesn't fit the current valve stem....
Click to expand...

Yes, you need to cut the valve stem. There is a video on this from that New Zealander who helped develop it. Let me know if you need help finding it. 

If you want to order a backup before cutting (I did but didn't need it) as I understand it the Lelya/Matador valve will work but then you'll need to cut both the plastic & metal ends. 

I only mention this in case Leshiy valves are out of stock. I'd confirm this before ordering as I doubt I'll be able to find the thread where that was discussed. 
 
  • Like
Reactions: Pizzaman2976
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu