Falcon FN19 .22

fritzalee · Jul 13, 2018

Does anyone out there in cyber land know how to disassemble, the Falcon FN19. Mine will not hold air, I know I need a collet to remove the brass fittings. my question is does the fill assembly with the check valve have reverse threads?

fritzalee

NMshooter · Jul 13, 2018

There are some videos on U-tube. I just sent a light hunter out. If you remove the barrel band, you can tighten the grub screws and use it like a ratchet ( not securing the barrel) to remove the end near the fill port. Pretty teadious to keep retightening and repositioning over and over again but it will work. Can't remember the direction of the threads

fritzalee · Jul 16, 2018

Found the problem, there is a hollow threaded insert that fits over the exhaust valve stem with an o ring that keeps the air from back flowing past the valve. That had come loose and prevented the hammer from reaching the valve stem, wasn't a fill problem after all, thank you for the reply.

Search

Search

Falcon FN19 .22

fritzalee

Member

NMshooter

Member

fritzalee

Member