Edgun Synthetic Stock Cleaner Degreaser

I used ordinary isopropyl alcohol on my bullboss stock before spray painting , no problem , that stock has a soft rubber finish . Repainted my synthetic puncher breaker stock with no problems also . I used Rust-oleum camouflage ,You can also wash the stock down with dawn dish soap prior to using the alcohol .

Ibc-PSI I've used acetone before but would test it on the inside of the stock first , it flash's really quick . Another option is (simple green) can be found at lowes or home depot Hot water and Dawn should do the trick but if it was me I'd sneak it from the wife I've been down that road with my wife's dawn LOL

You can use things like acetone and brake clean...IF you let them air dry. DO NOT wipe them dry or you will get some plastic smearing.

Any IPA will work, but you need to really scrub things. I used to work at in the Aerospace Industry. Years back the Government took away all of the cleaners that actually...worked, and forces us to use ONLY IPA (alcohol). To get the same clean, you have to use a clean rag, towel,, apply a good amount of your alcohol, and scrub well. Even to the point of using a soft bristle brush for any cracks or checkering.

Mike

Quite a while back the stock on my crossbow when from soft touch plastic to sticky plastic. It finally got so sticky it was hard to turn it loose.

My solution was to start with one of the mildest solvent I could think of - baby oil. Using some torn up T-shirt and a little scrubbing it worked great. It did not damage the finish at all, just cleaned it. The slower I went, allowing the oil to soak a little, the better it worked.

Perhaps you could start with that if it needs some serious cleaning and finish up with isopropyl alcohol or dawn?