Edgun r3m question

Forums PCP Airguns Edgun r3m question

  • Views : 603
  • Link

    DeadEyeDill
    Participant
    Member

    Okay so I just bought a used r3m off the member classifieds and super excited to say the least. I want a r5m but figured I’ll try this out and see if I like edguns (I know the r5m is a different beast just mean edgun in general) 
    now my question is what is the stock fps fir tge r3m long? The previous owner said it shoot the .25 25g at 905.
    seeing I’m only iinterested in shoot the 34g pellets, would the gun in stock for push the 34s? I’m hoping it can push the at least 840 without any adjustments. 
    but i I can’t I’m gonna go ahead and do the power tune I recon.
    Thanks in advance!

    Link

    Endeavor
    Participant
    Member

    Simple adjustment, increase the hammer spring tensioner while uncocked.

    Link

    Terryb00
    Participant
    Member

    Hi DeadEye 
    I’ve got the same gun; R3M .25 Long.
    I simply turned the HST up and I shoot JSB .34’s out of it exclusively. 
    My last string was 42 shots at 922 average.
    ES 34. SD 6
    It is a freaking lazer.

    Link

    DeadEyeDill
    Participant
    Member

    Terry, thanks for you info! Actually helps alot.
    your shot count is pretty darn good too I think!
    I’m hoping mine will be just as accurate! 

    Endeavor, thanks I was thinking just a simple HS adjustment would do but I didnt want to have a low shot count. But Terry’s is getting a decent shot count and he did what you said so I’ll do that

    Link

    Terryb00
    Participant
    Member

    DeadEye,
    I shoot it over the chrony with the Heavys, without the stock on, so Im able to access and turn the HST little turns till I get my speed where I want it.
    With the Long’s longer barrel and air tube you should be able to get similar results easily. 
    Enjoy, awesome gun.

    Link

    DeadEyeDill
    Participant
    Member

    “Terryb00”DeadEye,
    I shoot it over the chrony with the Heavys, without the stock on, so Im able to access and turn the HST little turns till I get my speed where I want it.
    With the Long’s longer barrel and air tube you should be able to get similar results easily. 
    Enjoy, awesome gun.

    awesome thanks! 
    I’m guessing your a fan of the edguns? 

    Link

    Terryb00
    Participant
    Member

    Major FanBoy, yes,
    Its the only brand I’ve held onto.
    Ed makes fantastic guns

    Link

    DeadEyeDill
    Participant
    Member

    I actually sold mi fx impact yo buy a R5M but after owning the impact and not being impressed with it for how much it cost I was hesitant to spend that much on another gun I know nothing about. 
    so I bought edgun thinking well it’s a cheaper way to step into Ed’s world. 
    I’m more excited about getting this used edgun yjan any other gun!?
    its also nice the previous owner will actually talk to be about the rifle and recommend what to do and not to do.
    if all goes well a r5m will be next.. well when they ate in stock 

    Link

    Terryb00
    Participant
    Member

    Link

    DeadEyeDill
    Participant
    Member

    “Terryb00”

    that’s nice! 
    do you by cchance know your reg pressure?

    Link

    Terryb00
    Participant
    Member

    Nope. Whatever they come stock at. I haven’t touched the regulator at all.

    Link

    DeadEyeDill
    Participant
    Member

    Okay thanks.
    the one i bought is set a 118 so I assume I may have to turn it up a touch. Luckily I h e a reg tester for it already.

    Link

    DeadEyeDill
    Participant
    Member

    Yup just got the edgun in and I can say I’m in love with it. 
    100% glad I sold my impact yo try something different because this edgun IMHO is a better feeling gun.
    r5 is for sure next!

Viewing 13 posts - 1 through 13 (of 13 total)

You must be logged in to reply to this topic.