Edgun r3m help

Forums PCP Airguns Edgun r3m help

  • Views : 357
  • Link

    DeadEyeDill
    Participant
    Member

    I got my new to me edgun r3m today and it’s a damn awesome gun.
    I’ve already shot probably 1 tin of mk11s already and was doing great. Then all of a sudden when I push the bolt forward it made a noise and then all the air drained out of the breach and muzzle!
    I dont know much about these guns yet and any help to figure out what happened would be much appreciated! 
    I’m guessing is a oring but I’m not sure. I just wanted to ask before I started taking it apart

    Link

    JWilson
    Participant
    Member

    Take off the breech block and look at where hammer contacts valve rod. Push the hammer forward and see how much valve spring tension is present. Sounds like a valve problem… maybe snapped valve stem.

    Link

    RomeoAlfa
    Participant
    Member

    I agree that it sounds like a broken valve stem.

    Link

    DeadEyeDill
    Participant
    Member

    I’m gonna have to agree.
    I took the breach block off and the valve stem was sticking out about an inch

    Link

    JWilson
    Participant
    Member

    Brian sells replacement stems. It’s an easy fix. New stems are a slight redesign and seem much more reliable.

    Link

    DeadEyeDill
    Participant
    Member

    Well just so happens the guy that sold me the rifle is a very stand up guy and he goes by the name kiba.
    he told me will send one out to me so that pretty sweet.
    It’s not the place to say but Kiba has the best person to deal with that I’ve come across yet.
     Very nice person and doesn’t mind answering questions. Also has been a big help with this rifle.

    Link

    JWilson
    Participant
    Member

    Make sure when you reassemble you use a brass ring seal at the transfer port. Some of the R3Ms came with rubber orings at the transfer port. The brass ring offers way better efficiency.

    Link

    Hynzie
    Participant
    Member

    ITS GOOD TO HERE U GONNA GET IT STRAIGHTENED OUT AND GREAT TO HEAR THERESMORE GREAT QUALITY PEOPLE WHO ARE IN THE AIR GUN WORLD

    Link

    Jlacouturec
    Participant
    Member

    cock the bolt back and fill with air and dont let preassure decrease to much…… thats all

    Link

    DeadEyeDill
    Participant
    Member

    “Jlacouturec”cock the bolt back and fill with air and dont let preassure decrease to much…… thats all


    I dont think that would help this much.

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.