Someone just posted asking for a list of the seals needed for the R3M. I thought I would post this entire list here so it might come up the next time someone does a search for EDgun o rings. If anyone has a list for the R5M and Lelya 2.0 maybe they can add it on here?
P.S. I found this info on another forum posted by WingmanNZ (thank you!) so I cannot take credit for it. Just passing it along!
Leshiy O rings
2.57 х 1.78 (005) -1pc fill valve
5 х 2.5 -1pc Manometer
5 х 1.5 - 4pc Fill probe, Regulator piston and Regulator adjuster screw
8.5 х 2.5 - 1pc Breech
9 х 1.5 - 1pc Regulator piston
12 х 2.5 - 1pc Regulator to plenum
18 х 2 -1pc Regulator plenum to valve body
18 х 3 - 2pcs Rear cylinder plug and outer regulator
29 х 1.5 - 2pcs stock magnet collar
29 х 2 - 1pc Moderator end cap
Lelya O Rings
2.57 х 1.78 (005) -1pc fill valve
5 х 2.5 - 1pc Manometer
5 х 1.5 - 4pcs Fill probe, Regulator adjuster screw, Regulator piston
2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) - 2x Breech
9 х 1.5 - 1pc Regulator piston
18 х 3 - 4pcs Regulator, valve body and cylinder front plug
19 х 2 - 1pc Moderator
Veles O rings
2.57 х 1.78 (005) -1pc fill valve
5 х 2.5 - 1pc Manometer
5 х 1.5 - 4pcs Fill probe, Regulator adjuster screw, Regulator piston
2.5 x 1 (.177) 3 x 1(.22) - 2pcs Breech pellet probe
9 х 1.5 - 1pc Regulator piston
18 х 3 - 4pcs Regulator, valve body and cylinder front plug
Matador R2.5 O rings
2,57 х 1,78 (005) - 1 pc (front plug filling valve)
2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) - R2.5 and R3 Pellet probe
9 х 1.5 - 1 pc Rear of the regulator piston
25 х 3 - 4 pcs Front and rear cyl plugs, regulator/valve body
5 х 2.5 - 1 pc Pressure gauge
5 х 1.5 - 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer port, x1, fill probe x2
7 x 1.5 - 1pc Barrel to breech
Matador R3 O rings
2,57 х 1,78 (005) - 1 pc Front plug filling valve
2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) 5.1 X 1.6 mm or 008 (.30 Gen 1) - Pellet probe
7 х 1.5 - 1 pc Gen 2 .30cal breech
20 х 3 - 1 pc Gen 1 .30cal front regulator body
9 х 1.5 - 1 pc Rear of the regulator piston
19 х 2 - 1 pc Suppressor seal
25 х 3 - 4 pcs Front and rear cyl plugs, regulator/valve body
5 х 2.5 - 1 pc Pressure gauge
5 х 1.5 - 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer-port, x1, fill probe x2
Matador R3M O rings
2,57 х 1,78 (005) - 2 pcs (front plug filling valve x1, R3M mag indexing cam tensioner x1)
5.1 х 1.6 - 1 pc for .22cal - 6 x 1.6 for .25cal R3M Breech to pellet probe
9 х 1.5 - 1 pc Rear of the regulator piston
19 х 2 - 1 pc Suppressor seal
25 х 3 - 4 pcs Front and rear cyl plugs, regulator/valve body
22 х 1.5 - 2 pcs (per mag) R3M multi-shot mags
5 х 2.5 - 1 pc Pressure gauge
5 х 1.5 - 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer-port, x1, fill probe x2
Morana O rings
2,57 х 1,78 (005) - 2 pcs (front plug filling valve x1, multishot mag indexing cam tensioner x1)
5.1 х 1.6 - 1 pc for .22cal - 6 x 1.6 for .25cal - multishot breech to pellet probe
2.5 x 1 - 2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) - single shot Pellet probe
9 х 1.5 - 1 pc Rear of the regulator piston
19 х 2 - 1 pc Suppressor seal (non escentric)
25 х 3 - 4 pcs Front and rear cyl plugs, regulator/valve body
22 х 1.5 - 2 pcs (per mag) R3M multi-shot mags
5 х 2.5 - 1 pc Pressure gauge
5 х 1.5 - 4 pcs Front of the regulator piston x1, regulator adjustment screw x1, fill probe x2
P.S. I found this info on another forum posted by WingmanNZ (thank you!) so I cannot take credit for it. Just passing it along!
Leshiy O rings
2.57 х 1.78 (005) -1pc fill valve
5 х 2.5 -1pc Manometer
5 х 1.5 - 4pc Fill probe, Regulator piston and Regulator adjuster screw
8.5 х 2.5 - 1pc Breech
9 х 1.5 - 1pc Regulator piston
12 х 2.5 - 1pc Regulator to plenum
18 х 2 -1pc Regulator plenum to valve body
18 х 3 - 2pcs Rear cylinder plug and outer regulator
29 х 1.5 - 2pcs stock magnet collar
29 х 2 - 1pc Moderator end cap
Lelya O Rings
2.57 х 1.78 (005) -1pc fill valve
5 х 2.5 - 1pc Manometer
5 х 1.5 - 4pcs Fill probe, Regulator adjuster screw, Regulator piston
2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) - 2x Breech
9 х 1.5 - 1pc Regulator piston
18 х 3 - 4pcs Regulator, valve body and cylinder front plug
19 х 2 - 1pc Moderator
Veles O rings
2.57 х 1.78 (005) -1pc fill valve
5 х 2.5 - 1pc Manometer
5 х 1.5 - 4pcs Fill probe, Regulator adjuster screw, Regulator piston
2.5 x 1 (.177) 3 x 1(.22) - 2pcs Breech pellet probe
9 х 1.5 - 1pc Regulator piston
18 х 3 - 4pcs Regulator, valve body and cylinder front plug
Matador R2.5 O rings
2,57 х 1,78 (005) - 1 pc (front plug filling valve)
2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) - R2.5 and R3 Pellet probe
9 х 1.5 - 1 pc Rear of the regulator piston
25 х 3 - 4 pcs Front and rear cyl plugs, regulator/valve body
5 х 2.5 - 1 pc Pressure gauge
5 х 1.5 - 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer port, x1, fill probe x2
7 x 1.5 - 1pc Barrel to breech
Matador R3 O rings
2,57 х 1,78 (005) - 1 pc Front plug filling valve
2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) 5.1 X 1.6 mm or 008 (.30 Gen 1) - Pellet probe
7 х 1.5 - 1 pc Gen 2 .30cal breech
20 х 3 - 1 pc Gen 1 .30cal front regulator body
9 х 1.5 - 1 pc Rear of the regulator piston
19 х 2 - 1 pc Suppressor seal
25 х 3 - 4 pcs Front and rear cyl plugs, regulator/valve body
5 х 2.5 - 1 pc Pressure gauge
5 х 1.5 - 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer-port, x1, fill probe x2
Matador R3M O rings
2,57 х 1,78 (005) - 2 pcs (front plug filling valve x1, R3M mag indexing cam tensioner x1)
5.1 х 1.6 - 1 pc for .22cal - 6 x 1.6 for .25cal R3M Breech to pellet probe
9 х 1.5 - 1 pc Rear of the regulator piston
19 х 2 - 1 pc Suppressor seal
25 х 3 - 4 pcs Front and rear cyl plugs, regulator/valve body
22 х 1.5 - 2 pcs (per mag) R3M multi-shot mags
5 х 2.5 - 1 pc Pressure gauge
5 х 1.5 - 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer-port, x1, fill probe x2
Morana O rings
2,57 х 1,78 (005) - 2 pcs (front plug filling valve x1, multishot mag indexing cam tensioner x1)
5.1 х 1.6 - 1 pc for .22cal - 6 x 1.6 for .25cal - multishot breech to pellet probe
2.5 x 1 - 2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) - single shot Pellet probe
9 х 1.5 - 1 pc Rear of the regulator piston
19 х 2 - 1 pc Suppressor seal (non escentric)
25 х 3 - 4 pcs Front and rear cyl plugs, regulator/valve body
22 х 1.5 - 2 pcs (per mag) R3M multi-shot mags
5 х 2.5 - 1 pc Pressure gauge
5 х 1.5 - 4 pcs Front of the regulator piston x1, regulator adjustment screw x1, fill probe x2