Edgun Matador r5m long

Mikepr · Jun 17, 2019

Todays shots after some mods

Open the mags with sandpaper for easiest loading

Lube all the moving parts

Set the reg at 116-117 bar

Put an oring between the silencer and the barrel grub screw ( not twist any more) probably the cause of spiriling

Shots at 140 meters, JSB 25.39, 880 fps

1560783657_6064819235d07ab29520810.50893365_Screenshot_2019-06-17-11-24-01-505_com.lketech.and...png

1560783673_644427985d07ab39e92387.68346402_IMG_20190617_085546.jpg

1560783693_20925985705d07ab4d9c5031.52433396_IMG_20190617_085553.jpg

1560783710_11568249065d07ab5e1c9e04.29252254_IMG_20190617_094426.jpg

1560783747_16942706595d07ab83563960.54039209_IMG_20190617_094435.jpg

bubblerboy64 · Jun 17, 2019

I can’t tell what I’m looking at. 22 cal or 25 ? What’s it measure center to center

jwrabbit123 · Jun 17, 2019

oring between silencer and grub screw?????

where is their a grub screw >>>>>??? I dont know what you mean but yes tuning mags sure helps , but have to not go crazy not much meat to tune , I remve orings and hone until my slugs drop by their own weight then I put orings back on the magazine

he is shooting 25 cal he said jsb 25 gr not 22

LOU

HeyU · Jun 17, 2019

JSB 25.39 grain pellet is 22 cal

Mikepr · Jun 17, 2019

The barrel at EDGUNS uses the thread in the front with a grub screw to tension it on the block of the gun

1560792155_19304490065d07cc5b429db3.20638741_64658497_368650820453576_3902277791881625600_n (1).jpg

i found that photo to see it

bubblerboy64 · Jun 17, 2019

Ok it’s the bottom of s coke can. I guess ? Darned it I could figure.

Mikepr · Jun 17, 2019

Ok it’s the bottom of s coke can. I guess ? Darned it I could figure.

Actually, this hall inside the angles is the barrel !

mike4406 · Jun 17, 2019

What size oring ?

thanks,

mike

Mikepr · Jun 17, 2019

What size oring ?

thanks,

mike

I dont know exactly

1,5 mm and smaller of screw so it can fit hard

Dan_Br · Jun 17, 2019

The barrel at EDGUNS uses the thread in the front with a grub screw to tension it on the block of the gun

i found that photo to see it

How does putting an o ring there help ? what does it do?

thanks

dan

Mikepr · Jun 17, 2019

The barrel at EDGUNS uses the thread in the front with a grub screw to tension it on the block of the gun

i found that photo to see it

How does putting an o ring there help ? what does it do?

thanks

dan

outside the hexacon

stibilize the silencer

Click to expand...

MikeVV · Jun 17, 2019

Wow, all kinds of new words for some newfangled dictionary.

For one, what the hell is a hexacon ?

The baffle in my Lelya is very stable, and gets more-so when the cap is tightened between the "front" (OEM) o-ring and the baffle.

Mike

Mikepr · Jun 18, 2019

Wow, all kinds of new words for some newfangled dictionary.

For one, what the hell is a hexacon ?

The baffle in my Lelya is very stable, and gets more-so when the cap is tightened between the "front" (OEM) o-ring and the baffle.

Mike

Hexagon is something with 6 angles, like the screw in the front of the barrel of Matadors

G instead of C, soory

Search

Search

Edgun Matador r5m long

Mikepr

Member

bubblerboy64

Member

jwrabbit123

Member

HeyU

Member

Mikepr

Member

bubblerboy64

Member

Mikepr

Member

mike4406

Member

Mikepr

Member

Dan_Br

Member

Mikepr

Member

MikeVV

Member

Mikepr

Member