friends, i decided to clean the cave of the hammer and hammer itself. which lube do you recommend? i have silicon oil which came with huma regulator. is it good to use this oil on the hammer?
edgun leshiy hammer lube
- Thread starter tsakula
- Start date
general airgun care
silicone oil is for O-RINGS, not metal to metal
hammers should NOT be lubed with oil or greases, only dry lubes or no lubes, just clean and smooth
some use a dry moly or graphite. Oils and greases on the hammer can cause erratic pellets speeds
silicone oil is for O-RINGS, not metal to metal
hammers should NOT be lubed with oil or greases, only dry lubes or no lubes, just clean and smooth
some use a dry moly or graphite. Oils and greases on the hammer can cause erratic pellets speeds
Upvote 0
I used some Teflon on mine. Just have to be careful of residue, I don't like it getting all over the place.
Upvote 0
powders are dry,,, oils and greases are wet,
yes, no lube on hammers ,works fine. Just clean dry and smooth
yes, no lube on hammers ,works fine. Just clean dry and smooth
Upvote 0