Tuning Edgun Leshiy 2 250mm .22 cal ISSUE!!!

Tighten and see what happens try to fix it yourself before reaching out just might be something simple 

Haven't heard of this before. If you close the gun without a mag in, does it close and stay closed - or can you give it a whack and it'll pop open? I think the key is to find out if that black pin is engaging at all.

Are you saying that if you hold the black lever in the closed position is works fine, but if you're not holding it it wants to pop open?

I just checked mine. Sounds like your tapered locking pin isn’t going into the hole of the lug far enough. The tapered locking pin locks up the action and on mine it doesn’t take much movement on the lever to disengage and open the action. Only about 1/16” . I would like to have more myself but it does lock and I can’t make it open without pulling the lever. When closed the lever doesn’t go all the way down compared to when the action is open so the pin is either bottoming out in the lug or it isn’t centered in the hole. Check your lever throw when closed and when open and see if the pin is going down all the way when closed. There is an Allen screw and a pin holding the silver lug, see picture. Maybe if you loosen the Allen screw the silver lug can be adjusted in and out to align with the locking pin. I would loosen the screw, close the action and see if that helps. If it does then tighten the screw and you should be good to go. This is just a guess. Please let us know if this does it. 

Wow that video concerns me as I said my leaver only moves a tiny bit before it unlocks the action. The fact you say it won’t unlock unless the gun is fired really confuses me as it is just a simple locking devise. Is the leaver Jammed tight when closed? Or can you still move it. If you can still move it then the tapered pin must be broken. Definitely call Brian at EdGun West and he will take care of it. Good luck