My L2 "original" jets were misslabaled as well, but I bought a whole jets kit afterwards, I measured each hole and all these were spot on.
Upvote 0
EDgun Edgun Leshiy 2
- Thread starter Navnesen
- Start date
It was mentioned by Ed and Brian very early on that they bore the ones out that come on the gun in the original setup process. So yes disregard the numbers on the jets that come on the gun.
Upvote 0
It didn't bothered me, I even re-drilled whatever those were to .5 and .7. And still ended up buying a kit. Right now I have 2x0.7 and it was pretty close - last weekend, but today I fire-lapped that .22x500 barrel, will see tomorrow at my range if any better.
Upvote 0
I know but my point is saying these are mislabeled without any disclaimer is a bit misleading when it was stated several times by the manufacturer and dealer.
Good luck tomorrow.
Upvote 0
I know but my point is saying these are mislabeled without any disclaimer is a bit misleading when it was stated several times by the manufacturer and dealer.
Good luck tomorrow.
It's the first time I've heard of it. The manufacturer and dealer can say it as much as they like, if they're not talking to their customers it does not really matter. I don't know where they said it, but they did not get their message across.
Upvote 0
Somewhere back over winter time in this same thread Edgun chime in telling us that ppl will mod anyways.
Upvote 0
Hello ....quick question where did you get your 500 barrel? It seems like they’re not available anywhere, thank you very much
Upvote 0
Edgun Spain sells them but only have .25 cal in stock
https://www.edgunleshiy.shop/collections/magazines
Upvote 0
Those all appear to be metal magazines. I think both the black and red magazines sold by Edgun Spain are milled out of aluminum.
I thought the polymer magazines were only sold on eBay, out of China.
Upvote 0
Back in Nov.2021 I bought from an ebay seller from Russia, I got my two 500 polygonal barrels (.22 and .25) about 2 months later in early Feb with a last train. Not sure he still able to deliver.
Upvote 0
The vendor used to be on ebay, but he's gone now. I imagine its due to sanctions.
He's very slow to deliver as bugHUN mentions, but if you're patient, they offer some unusual barrels.
Upvote 0
Actually the delivery to the post office in home Russia wasn't really slow, I was tracking the dates. But the package stuck along the way in Poland and no further information which way was travelling for 2.5 months. I think the entire cargo shipping air-or-surface, across the globe is in big mess.
What I knew from earlier but lately just gets more ridiculous... for example canadapost and USPS are disconnected. If I send you something or vise revers you sending me something the tracking number shows the senders country only, onse leaves across the border no info.
Just these recent months I sent some L2 parts I am no longer using - to Brazil, could not track it was all blank for a month until he got the package. Ordered from a fella two barrels from US/South CAl, left the city airport and all blank again.
Upvote 0
If I understand the tracking on my package, it was sitting in Canada Customs for near 2 months.
Upvote 0
Leshiy 2, .22 cal 350mm Alfa barrel, reg setting and jet size as came from factory
Shot indoors from bench @ 35 yards
JSB Jumbo Exact Heavy 1.175g/18.13 grain @ 280m/sek/919fps
152 shot, all average 1.43 MOA, highest 1.75, lowest 1.01 MOA
High right target, adjusting scope
Low right target center bull not included reason being first shot was high (reg creep after sitting in cabinet for a week)
Very happy with that Alfa barrel, it may be pellet picky but what it likes it loves, no flyers whatsoever!
Pellet visually sorted from tin because duh....Mr. postman...
Shot indoors from bench @ 35 yards
JSB Jumbo Exact Heavy 1.175g/18.13 grain @ 280m/sek/919fps
152 shot, all average 1.43 MOA, highest 1.75, lowest 1.01 MOA
High right target, adjusting scope
Low right target center bull not included reason being first shot was high (reg creep after sitting in cabinet for a week)
Very happy with that Alfa barrel, it may be pellet picky but what it likes it loves, no flyers whatsoever!
Pellet visually sorted from tin because duh....Mr. postman...
Upvote 0
Similar results here, the JSB heavies and also the H&N Barracuda and Hunters in 18 gr work very well as shipped.
I've started to play with the NSA 20gr slugs and they are not doing as well. I need to get the chrony on both to see where I am speed wise.
Upvote 0
Now, just for a fun of it. Don't change anything on the gun, and go to 50 meters and post us those pictures.
Upvote 0
Is there any difference in these mags besides the tapered stud? The taper does make it load easier
Upvote 0