I felt the same way and asked Brian about shortening it up and he said it was as short as it would go.
Upvote 0
EDgun Edgun Leshiy 2
- Thread starter Navnesen
- Start date
I suppose the problem is if you shorten the top tube, the bottom tube likely would be too long.
Upvote 0
He told me the same thing, I'm running the 300cc bottle on the bottom and I measured the top plenum @ 140mm. I could grab the 110 and make it much shorter.
Upvote 0
When hiking around with the L2 in a sling, I have noticed the safety is easy to knock to live. I'm working on a simple "double" safety system, using a toggle. Here's v1, not field tested but seems to work well:
Upvote 0
I view the "real" safety on the Leshiy 2 as either having the rifle folded or with the stock completely removed. The trigger safety is a smaller, less-significant item.
So when I walk with it, it is folded. My ritual is to turn the safety *on* before I assemble the rifle (unfold or attach stock). That way I don't have to worry about the status of the safety while walking.
Upvote 0
Has anyone already tried whether NSA's .219 slugs fit in the magazine? Or Zan's .219 slugs?
Alpha Precision's groove is 5,60mm like .220 But magazines which I have don't take that wide diameter. Just pressing a little bit 218,8 fits in...
Need to do some testing with .219 diameter slugs first. How well those works and which is velocity.
Maybe I need to drill one magazine wider...
Alpha Precision's groove is 5,60mm like .220 But magazines which I have don't take that wide diameter. Just pressing a little bit 218,8 fits in...
Need to do some testing with .219 diameter slugs first. How well those works and which is velocity.
Maybe I need to drill one magazine wider...
Upvote 0
The NSA 0.219's are a perfect fit. I have not acquired the 0.219 Zans yet.
Although you did not ask, the Altaros 5.56's are also a perfect fit.
edit: Just ordered 12 packs of ZANs.
Last edited:
Upvote 0
Alright. I was not aware that Altaros also has that diameter slugs also. I need to consider that and order them for the test as well. Thanks for the information
Upvote 0
The Altaros slugs are very long. I imagine they'd be great for long distance, but you'll be consuming a lot of air to get them off quickly.
Upvote 0
Ok. Just check those Altaros slugs and ordered few box to test.
No worries. I do my shooting at range and I can hook up my L2 straight to scuba bottle and one fellow has compressor on board so filling scuba bottle is possibility also .
Upvote 0
Has anyone tried the NSA 33.6 grain .254 slugs yet? I was going to pick up a pack to do some testing once I can convince my father to bring back my L2 
Upvote 0
I hope so too. But you'll see it when you get to test it on the rangePerfect that has a chance for sure.
Upvote 0
Does anyone have any of the lighter/cheaper polymer magazines, they would like to trade for the metal in .25?
.25 Metal magazine weight ~0.8oz
.25 Polymer magazine weight ~0.5oz
I use custom slugs from Altaros that are a touch too wide for the 3 metal mags I own. I am happy to cover your shipping costs.
.25 Metal magazine weight ~0.8oz
.25 Polymer magazine weight ~0.5oz
I use custom slugs from Altaros that are a touch too wide for the 3 metal mags I own. I am happy to cover your shipping costs.
Upvote 0
Hello everyone, I understand that changing the jets you can increased or decrease the power on the gun so my gun came with 0.4 (both) 25.cal the reg is on 130, so does anyone has a combination to increase the FPS? Thank you very much guys .
Upvote 0
Something to be aware of is that many of the jets from EGW came mis-labelled. I don't know if this was a small run or something else, but the original jets on my Leshiy 2 (from EGW) were strongly mis-labeled, and I've seen similar mis-labelling on other Leshiy 2's.
I'd either measure your jets or compare them to some "known to be accurate" jets before you trust the numbers on the side.
Upvote 0