after trying to diagnose my own 30 I found this videos on utube and it's exactly what's wrong with my 30 maybe other have this problem
Edgun .30 caliber problems
- Thread starter bornkiller
- Start date
after trying to diagnose my own 30 I found this videos on utube and it's exactly what's wrong with my 30 maybe other have this problem
I wanted to say u guys remember Michael
i agonized!! Over the decision to buy this rifle I did my home work and chose This gun over the kalibur cricket (a mistake) because of its past reputation as reliable and accurate and the fact that this was a gen 2 the valve issues should have been fixed
very disappointed I have a 2000 dollar
bump on a log
i agonized!! Over the decision to buy this rifle I did my home work and chose This gun over the kalibur cricket (a mistake) because of its past reputation as reliable and accurate and the fact that this was a gen 2 the valve issues should have been fixed
very disappointed I have a 2000 dollar
bump on a log
Upvote 0
I was pretty interested in this , would be great if it would prove to be accurate as well.
Cricket 9mm seems awesome, but i really haven't seen a single decent group coming out of it @ 100 meters sofar
Upvote 0
Yeah I was surprised Edgun never really responded to this issue. Seems it would have been pretty easy to say yup there is a problem and we will address it.
Upvote 0
G
Guest
Guest
Upvote 0
Those edguns are nothing but a big pile of horse crap! I had a .22 that was awful and quickly pawned it off. The only thing I liked was the stock other then that 2 thumbs down. Just my honest opinion
Upvote 0
Lol not one but TWO thumbs down!? I heard good things about the .25 cal. It also has one of the best stock designs compared to the vast majority of guns. Id just wait for v3 where he fixes all of the issues and adds a few improvements. I also like his account on here and how he is reaching out to the people with issues. This shows that he is open minded and stuff. I saw a some post from fxairguns too but not so much nowadays. Slayer air arms has crossman and they do a good job reviewing the gun features with us and addressing issues, at least on other forums. Id contact edgun on the forums about it and see what he suggest.
Upvote 0
That YouTube reviewer noticed a thin valve stem on the Edgun? Heh, but does not notice MAJOR quality issues with his beloved Taipan Mutant some of us are heaving to resolve. Which is hilarious to even listen too how faked up your US dealers are. Especially after Taipan was exposed by Mr.Sniperqty
Eduard on the other hand, is a real man and a gentleman, said they will fix the issue straight up. Probably because it is his work and creation and he cares. I wish the owner of Taipan was this honest as well as some other Chinese and Korean manufacturers. Admit and fix problems in their air rifles, or even provide replacement parts.
Fuko, I am like you I don't like this post also. Ed and his Edgun company is a treasure and his is one of the best people in this business in terms of knowledge. Just watch his tube channel. Spasiba Ed.
Eduard on the other hand, is a real man and a gentleman, said they will fix the issue straight up. Probably because it is his work and creation and he cares. I wish the owner of Taipan was this honest as well as some other Chinese and Korean manufacturers. Admit and fix problems in their air rifles, or even provide replacement parts.
Fuko, I am like you I don't like this post also. Ed and his Edgun company is a treasure and his is one of the best people in this business in terms of knowledge. Just watch his tube channel. Spasiba Ed.
Upvote 0
Blizzard .
It wasn't an isolated problem....
Most of the .30 edguns had the same issue.
He didn't find the problem either it found him....
Pretty hard to shoot a gun when the valve stem is bent...
Now on a positive note .... hopefully this is a reliable fix and these guys can get there Eddies fixed.
I know I love mine..... (2nd place to my mutant shorty)
It wasn't an isolated problem....
Most of the .30 edguns had the same issue.
He didn't find the problem either it found him....
Pretty hard to shoot a gun when the valve stem is bent...
Now on a positive note .... hopefully this is a reliable fix and these guys can get there Eddies fixed.
I know I love mine..... (2nd place to my mutant shorty)
Upvote 0
There is a fix for this now, on another forum the guy in this very video got in contact with, I belive it was John Hagan and they cane up with a fix. So contact hagan tools if you have this problem
Upvote 0