ED-GUN LESHIY WOW

Jump to latest Follow Reply
jwrabbit123

jwrabbit123

Member
Feb 14, 2018
1,982
369
Ct, United States
Hi I have been shooting a new ed-gun leshiy for about 1 week now in 22 caliber , It has the 12 inch barrel and a wooden hand grip and fitted with a huma regulator .I have a SWFA 1X6 HD scope on it , I shot 5 shot groups today at 90 yards .MY best today was amazing for this little gun .6 inch CTC group . I am blown away with this 4.1 pound gun with the long barrel and this scope , Enclosed is pics of gun and my best target shot today at these settings . Here is shot string also , which also has alot of shots and I dont even know If I have it set up best yet , great gun 





1533688883_6512343915b6a3c337456c5.14063140_leshiy.jpg
1533688838_17993697525b6a3c0620d150.04433748_leshy mag barrel.jpg
shot FPS

1. 783,0 260 bar
2 ,779,6
3. 790,9
4 .782,1 EDGUN LESHIY 8/7/2018
5 .786,5 jSB 18.1 PELLETS
6. 798,9 REG SET AT 120 BAR HUMA
7 .795,3
8 .794,4
9. 792,6
10 .798,0
11 .807,1
12. 812,6
13 .818,3
14 .818,3
15. 816,4
16 .820,2
17 .818,3
18 .837,6 120 bar off REG
19 .855,8
20 .863,1
21 .852,7
22 .837,6
23 .814,5 90 bar




 
Great shooting, 

See that off-reg spike, that comes from too much of the speed being controlled by the hammer spring. What you're seeing is a valve that is being held closed by pressure and not allowed to open the proper amount to exhaust the plenum. Almost every regulator will spike a little at the end of the string, but most of it can be controlled by finding the proper balance of HST and regulator setting for the desired speed. The quick and dirty way to find the speed / HST setting is to fill about 10 bar above the regulator setting. If you get a spike, then the HST needs to be turned up to the spiked speed. If you want the pellet speed to be lower when compared to the speed shown at the regulator spike you will drop the regulator 5 bar and try your short string again. This method will save air and time.

Brian
 
  • Like
Reactions: Macros and Glem.Chally
Upvote 0
Great shooting, 

See that off-reg spike, that comes from too much of the speed being controlled by the hammer spring. What you're seeing is a valve that is being held closed by pressure and not allowed to open the proper amount to exhaust the plenum. Almost every regulator will spike a little at the end of the string, but most of it can be controlled by finding the proper balance of HST and regulator setting for the desired speed. The quick and dirty way to find the speed / HST setting is to fill about 10 bar above the regulator setting. If you get a spike, then the HST needs to be turned up to the spiked speed. If you want the pellet speed to be lower when compared to the speed shown at the regulator spike you will drop the regulator 5 bar and try your short string again. This method will save air and time.

Brian
Click to expand...

Great explanation Brian!
 
Upvote 0
HI I wanted to update my new shot string , I now gained a few shots but my diaviation is much less , I didnt do groups yet because it is like 100 in the sun now but here is my latest setting i AM AMAZED WITH THIS



1 864,2 fill to 288 bar 8/8/2018
2 861,0 edgun leshiy 22 cal
3 861,0 12 inch barrel , huma reg set at 102 bar
4 866,3 fill to 288 bar
5 860,0 shot to 90 bar
6 869,5 Ed-gun pellets 18.2 grain sorted pellets
7 861,0
8 860,0 25 GOOD SHOTS
9 860,0 14 FPS VARIATION ON ENTIRE STRING
10 868,4
11 866,3
12 865,2
13 867,3
14 858,9
15 858,9
16 858,9
16 857,9
18 860,0
19 860,0
20 855,8
21 855.1
22 855,0 101 bar off reg
23 851.6

24 849.7

25 842.3 84 BAR






 
Upvote 0
Leshiy o-rings list (Talon forum)

2.57 х 1.78 -1pc fill valve
5 х 2.5 -1pc manometer
5 х 1.5 - 4pc fill probe, regulator piston, regulator adjuster screw
8.5 х 2.5 - 1pc breech 
9 х 1.5 - 1pc regulator piston 
12 х 2.5 - 1pc regulator to plenum
18 х 2 -1pc regulator plenum to valve body
18 х 3 - 2pcs rear cylinder plug and outer regulator 
29 х 1.5 - 2pcs stock magnet collar
29 х 2 - 1pc moderator end cap
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu