What would be, or would there be, any advantage to doubling up the new Dreamline Power Plenum? They are fairly inexpensive.
Dreamline power plenum x2
- Thread starter Corvid_hunter
- Start date
I was thinking the same thing, especially for .30cal. Bob Strene's rule is one cc per ft-lb.
Upvote 0
I was talking total volume. I found Bob's article about plenum size, you might find interesting. https://hardairmagazine.com/ham-columns/introduction-to-the-pcp-regulator-dont-ignore-the-plenum/
Upvote 0
Seen people do that with Taipan Veterans. Keep in mind there it is a decreasing efficiency curve unless you really start modding for more power...larger ports...heavier hammer springs...etc.
Upvote 0
It's more advantageous for larger calibers and/or heavier projectiles. If that's your goal, you'll benefit from extra volume. Just be be aware that other mods are needed with porting, springs, and lots of trial and error to get everything in harmony.
Upvote 0