Don't feel left out!
- Thread starter thammer
- Start date
I’m hoping these are a big hit, I would like a 500-600 mm 22 cal for my Leshiy2. The fx style would work fine since I’ve got the sub12 adapters. 1/2x20 for a can.
Upvote 0
Sounds like a winner and exactly what the market needs. Which guns do you plan drop in barrels for ?
Upvote 0
Everything I possibly can!... lol...obviously all Kral Family guns, Avenger/liberty Family. Those will likely be the first runs but will sell blanks to fit or make drop in barrels for most current brands and models including FX/Daystate/Brocock/AGT/Taipan.
Upvote 0
Troy, I've got 3 unused Veteran barrels sitting on my bench. If you get to a point that borrowing one for duplication would be helpful I'd be more than willing to lend you one for a bit to make it happen.
Upvote 0
I can send my RTI barrel in as well if need be. It's pretty straight forward but wouldnt hurt.
Upvote 0
Is the bore and groove surface area about equal? What slug diameter do you expect to work best?
Upvote 0
It's 70/30 70% being groove to reduce friction. Being .217 groove diameter I expect .217 or possibly .2175 to perform best. Went .217 to have the highest likelihood that pellets will shoot well too.
Upvote 0
I had a different TJs 3 groove that was .214/.209 and was more like 33/66 than 50/50 bore to groove ratio. Could be different but I'd suspect not being it's to help cut down on the friction
Edit: Well I see Troy answered before I refreshed the page lol. I was close.
Edit: Well I see Troy answered before I refreshed the page lol. I was close.
Upvote 0
I would like to try one on my pre air force raw hm 1000x to but it's a 25 cal hopefully that will be next
Upvote 0