Does fx wildcat mk2 in 0.22 has external reg adjustmen?

Forums PCP Airguns Does fx wildcat mk2 in 0.22 has external reg adjustmen?

  • Views : 428
  • Link

    West
    Participant
    Member

    I had order wildcat mk2 in 0.22 cal. According to the website it has external regulator adjustment. Tried to search some review of mk2 but found nothing about external adjustment for 0.22. Can someone shed a light on this? 

    My plan once receive are,

    1. Install pressure gauge for regulator

    2. Make some modification on the synthetic stock to make access on the hammer spring adjustment screws

    3. Barrel indexing 

    4. If i missed something please let me know

     

    thanks!

    Link

    Bigragu
    Participant
    Member

    For he life of me I still don’t know how to adjust mine on my WC MK2. I watch videos of folks using that brass plug under the stock, left side, for a pressure bleed off whenever you need to open the gun up, but have never seen how this same area is used for reg adjustment. It sure would’ve been nice if FX would’ve made an instruction booklet/owners manual for such a popular gun.

    Link

    lenweber2
    Participant
    Member

    Was curious and did search for a tune and I can't find anything. Propaganda says it has the new Reg. so if you find it the adjustment should be in the center the same as other FX guns.

    Link

    lenweber2
    Participant
    Member

    Here is what I did find in the pressure tube Reg.

     

    Link

    West
    Participant
    Member

    Thank you for the response! 

    I found this on pyramydAir website, they mentioned externally adjustable AMP regulator, i havent read any info about this on this forum yet. Hopes its true even for other caliber of wildcat mk2

     

    FX Wildcat MK II Synthetic 

    • Skeletonized synthetic stock
    • Precharged pneumatic
    • Forward-positioned, side-lever action
    • Two-stage, adjustable trigger
    • 11mm dovetail scope mount
    • Ambidextrous grip
    • Manual safety
    • Fixed, stackable moderator system
    • Externally adjustable AMP regulator
    • 230 BAR (3,335 PSI) Fill Pressure
    • FX Interchangeable Smooth Twist X (STX) Barrel System
    • 980 FPS (.177), 890 FPS (.22), 905 FPS (.25), 850 FPS (.30)
    • Fully shrouded and moderated barrel
    • Comes with one magazine and 3-year, transferable warranty
    • 20 FPE (.177), 32 FPE (.22), 48 FPE (.25), 82 FPE (.30)
    • 8-shot magazine (.177, .22 & .25), 7-shot magazine (.30)
    • 100 shots/fill (.177), 60 shots/fill (.22), 50 shots/fill (.25), 30 shots/fill (.30)
    • 250 cc air cylinder (.22), 300 cc air cylinder (.25 & .30)
    • Fingerprint-resistant coating on all metal part

     

     

    Link

    West
    Participant
    Member

    Bigragu

    According to the review ( for 0.30 cal i think) the adjustment screw for amp regulator is somewhere near the bleed hole of the reg at the main tank. There are 2 holes as they said, one is for the regulator bleed and the other is for the amp regulator adjustment

    • This reply was modified 5 months ago by West.
    Link

    JCD
    Participant
    Member

    There are two holes in the pressure tube near the action. One (should be the one on the bottom of the tube under the stock) has a visible allen screw and that's the adjuster. 

    Link

    tor47
    Participant
    Member

    The very first mk2 models might not have the AMP reg. At least that was the case with the .177 models in Norway.

    Link

    Bigragu
    Participant
    Member

    JCD and West- Thank you.

    Link

    West
    Participant
    Member

    JCD

    is that also true with 0.22 cal?

    Thank you!

    Link

    JCD
    Participant
    Member

    @west

    My .22 WC is over a year old and has AMP Regulator with the external adjuster

    Link

    West
    Participant
    Member

    JCD

    thank you very much for confirmation!!

    On what regulator setting was the default?

    Link

    JCD
    Participant
    Member

    Never did test the actual output. I turned it down just a little to help balance with the HS tension, it drops off the reg at around 110 per the gauge on the gun but that could be 90 or 130 or…. I think I have it set for about 860 with JSB 18.1's. Haven't shot it more than a few min here and there for the past couple months and honestly don't even recall the shot count but I think it's 50+. 

    • This reply was modified 5 months ago by JCD.
    Link

    West
    Participant
    Member

    JCD, thank you very much😊

    Link

    Bigragu
    Participant
    Member

    Ok, found that reg adjustment, but decided instead to install a Huma reg with the assistance of the WC master, Mr Chuck. Holy Moley, 933 FPS shooting a 44.75 grain 30 cal pellet. This gun has a forever kick back now once fired! I like it! Thank you, Chuck!

    Link

    West
    Participant
    Member

    Good day!

    i just received my wildcat mk2 today!

    it seems that i only have one hole at the tank, and it has allen screw on it.

     

    • This reply was modified 5 months ago by West.
    Link

    Bigragu
    Participant
    Member

    The other hole should be directly across from the hole with the adjustment screw for the AMP, so that would put it at about the 2:00 position on the right side of the gun. FX plugged that hole with a tiny rubber ball, which you can lose really easily if your not careful. 

     

    Link

    West
    Participant
    Member

    I cant see any rubber ball at the opposite side of the hole (2 o clock position). Is this means i got the old version of mk2?

     

     

Viewing 18 posts - 1 through 18 (of 18 total)

You must be logged in to reply to this topic.