Did a drastic mod on the stock of my FX crown

Jump to latest Follow Reply
T

tor47

Member
May 18, 2018
1,239
188
Other, Norway
Some of you might thing I am crazy. But if you like me, find it inconvenient having to take the stock of the gun, every time you want to fine tune the hammer spring on the gun, you can do this:

1574704391_3528457915ddc1507947030.55914707_IMG_20191125_183335.jpg
1574704461_20934641835ddc154d075e14.88694986_IMG_20191125_183421.jpg


It probably doeas look ugly, but it should make things easier. But not a good idea if you are planning to sell the gun in the near future:)
 
Beat ya to it :) it's been this way for a while. Drilled a tiny hike thru the back as well so I can back out the retaining screw and remove/drop a whole nother hammer adjuster in there with a different preset. Of course this would necessitate removing the power wheel. But I have 100 spare 3mm ball bearings for this occasion 😂 A litte grease keeps them in place. But eventually the grease gets displaced....



Just need to get a high volume compressor so I can properly spray it and another stock I have. 

1574732588_16032843205ddc832c6d3206.45311333_DSC_1019.JPG

 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu