Dialing the hatsan and choosing pellets

Stefanjan · Aug 17, 2018

Finally getting the at 44 dialed in. Added an air stripper and tuned that. Accuracy improvements were immediate. Still need to dial back the power a bit. Here are some groups. 5 shots at 25 yards and 3 to 5 mph wind in my face

1534515356_15870715735b76d89c1580a7.14832541_20180816_162813.jpg

1534515358_16358863455b76d89ee92cd2.78954923_20180816_162727.jpg

1534515361_19625364305b76d8a1dccca5.63911716_20180816_162713.jpg

1534515364_6447067005b76d8a4be7818.14975215_20180816_162658.jpg

Seems to like the h&n barracuda matches best. The jsb tru a flyer that may have been my bad. The h&n 4.52 flyer was my fault as i pulled it due to a mosquito. Gonna get a regulator in one of the tanks with my next bonus

Rodeo · Aug 17, 2018

Did you get the long or the short AT44? I got the short. I installed the Huma reg and did the valve mod - close five ports / open up the 6th port. This combination gave me a nice low fps extreme spread. Mine likes the 15.89 and 18.13 JSB's.

Stefanjan · Aug 17, 2018

Short non qe. In 177 cal. Just ordered 8 tins of pellets (some new to try that should work based on similiar results). I plan on tearing into the second cylinder soon and working on some mods once the weather turns bad. Winters get pretty dreary around here and most winters offer little in shooting opportunities as nobody wants to trudge thru 2 ft. Of snow to set up targets lol.

chasdicapua · Aug 17, 2018

Those Hatsan's shoot pretty hot. Try the JSB monsters. They are 13gr and may be a good match for your rilfe.

Stefanjan · Aug 17, 2018

Lol got a tin on its way.

Search

Search

Dialing the hatsan and choosing pellets

Stefanjan

Member

Rodeo

Member

Stefanjan

Member

chasdicapua

Member

Stefanjan

Member