Custom big bore airgun bullet maker

Forums Pellets, Projectiles, Slugs, & Ammo Custom big bore airgun bullet maker

  • Views : 639
  • Link

    pcphunter
    Participant
    Member

     I have been designing bullets and having molds cut by NOE and Accurate molds for 3 yrs. now. along with stock molds from NOE I now have 59 molds for .220 38 gr. bullets up to .510 580 gr. bullets. Many of then are hollow point and a couple of them I have set up with aluminum ballistic tips. I am a manufacture and I wholesale to AOA and R&L only. I have a day job that takes up most of my time so I have not gone into full production. Lately Kip from AOA and I have put or heads together and designer several .308 ,.357 and .452 molds that preform great even at ranges over 100 yds. I design bullets for accuracy and performance. Performance meaning How well they open in animals and provide a quick and ethical kill. I can cast and size most of my molds with lead free alloy. If anyone out there is looking for a specific cal. weight and design let me know. I will see if I have it or if it sounds good I may have a mold made. I will be posting pictures of bullets I make as time goes on. If you would like to place an order contact Kip at AOA. Special orders may take a couple of weeks.

    Link

    GQ
    Participant
    Member

    Can you mould .25 calibers with 80 grains and more ?

    Link

    pcphunter
    Participant
    Member

    Are you looking for .25 or .257?

    Link

    GQ
    Participant
    Member

    .25 for my FX Impact.

    Link

    pcphunter
    Participant
    Member

    The only .25 caI. I have for pellet barrels is a Bob’s boat tail that drops out around .253 As usual it works in some barrels and not others. NOE has these molds for sale. I got the .251 mold and it still drops out at .253.  Also a bullet that long would require a faster twist rate that a smooth twist barrel has. http://noebulletmolds.com/NV/index.php?cPath=374_376

    Link

    pcphunter
    Participant
    Member

    I did a quick design and it would have to be at least  .620″ long to hit you target number of 80 gr. and that would be way too long. They would most likely tumble right out of the barrel and destroy your shroud. I have shot .475″ long 38 gr. bullets from a .22 smooth twist barrel and did not get very good results.

    Link

    Tony.fryery
    Participant
    Member

    What do you have in .257?? Looking for around 60ish grain hollow points.

    Link

    pcphunter
    Participant
    Member

    Sorry, I have .257’s from 54 gr. to 120 gr. but no hollow points yet. 

    Link

    huntingjeff
    Participant
    Member

    Something I was thinking about , And im new so if this has been addressed sorry, the airforce Texan likes a long bearing surface for accuracy which is fine for deer 350-410 grain. But for varmitt size game it will work with a lot of Kentucky windage. Has anyone tried building a bullet with the same demonsions but out of a lightweight alloy so it would have the same bearing surface at say 150-180 grains or less, Thanks Jeff

    Link

    pcphunter
    Participant
    Member

    Yes, take a look at my youtube video. 202 gr. lead free varmint Greenade,
    http://www.youtube.com/watch?v=-_fllnXpj0E
    A little mishap with the camera and almost broke my neck tripping over a cord. I had a Bill Dance moment and I did not edit it out, I figured it was worth a few laughs.

    Link

    Willie14228
    Participant
    Member

    What was your maximum range with the varmint grenade

    Link

    pcphunter
    Participant
    Member

    2in. 3 shot group at 100  yds. filling each time. I have not shot them farther. Also I forgot to put them in the box. I well send you some next week.

    Link

    Willie14228
    Participant
    Member

    Did you say you had some in a 357 caliber?
    Would be interesting to see how well the bulldog does with it

    Link

    Willie14228
    Participant
    Member

    Wahoooo I got a heavy box in the mail today full of little lead soldiers ready to go out and reek havoc
    Thanks brother I will build me some fresh test targets and report back to you next weekend …
    Good Lord you said you where going to send me some hog killers you wasn’t kidding

Viewing 14 posts - 1 through 14 (of 14 total)

You must be logged in to reply to this topic.